APart H20-G Folheto
TECHNICAL SPECIFICATIONS
APart H20-G
HORN LOUDSPEAKER
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
The H20-G is a powerful weatherproof industrial horn loudspeaker with
compression driver. It offers a high sound pressure, which makes this loudspeaker
ideally suited for speech and the reproduction of alarm signals. The H20-G is
ideal for long-distance and outdoor use.
compression driver. It offers a high sound pressure, which makes this loudspeaker
ideally suited for speech and the reproduction of alarm signals. The H20-G is
ideal for long-distance and outdoor use.
Thanks to its stainless steel bracket, the H20-G will remain truly rust free. The
bracket also makes it possible to rotate the speaker over a range of more than
180 degrees. Because this horn speaker is constructed in high impact ABS, it is
able to withstand even the harshest of elements.
bracket also makes it possible to rotate the speaker over a range of more than
180 degrees. Because this horn speaker is constructed in high impact ABS, it is
able to withstand even the harshest of elements.
The loudspeaker is equipped with a high quality 100-volt transformer with several
power taps, and can also be used in 8-ohm systems. The APart technology avoids
any overload of your amplifier by controlling the impedance with the unique IMC
protection device inside.
power taps, and can also be used in 8-ohm systems. The APart technology avoids
any overload of your amplifier by controlling the impedance with the unique IMC
protection device inside.
Type :
Compression driver horn speaker
Material :
high impact ABS
Standard colour :
grey
IP Rating:
66
Rated power RMS :
20 W / 100 volt
Music power RMS :
30 W / 100 volt
Transformer power taps by rotary switch :
2.5 – 5 – 10 – 20 W / 100Volt
Rated power RMS :
20 W / 8 ohm
Music power RMS :
30 W / 8 ohm (lo-cut)
SPL 1 Watt / 1 Meter:
105 dB
Max SPL:
117 dB
Frequency Range:
280 - 9500 Hz
Dispersion:
140° conical
Impedance:
100 volt / 8 ohm
IP rating
66
Cable length :
Approx. 40 cm
Dimensions Outside Ø :
200 mm x length : 232 mm
Weight including bracket :
1.36 Kg
Mounting holes :
3 x Ø 6.5 mm