Aeg Electrolux pe4520-m Manual Do Utilizador

15

the coffee and the appliance will display
"GROUND TOO FINE ADJUST MILL AND PRESS
OK" and then "FILL TANK!".  Check the level of
water in the tank and replace in the appliance.
To use the appliance again, insert the hot water
spout (fig. 6) if not already in position, press the
OK icon (B9). "HOT WATER PRESS OK" is displa-
yed. 
Press the OK icon (B9) within a few seconds and
deliver water from the spout for about 30 se-
conds.  When delivery stops, the basic modes are
displayed again. 

The coffee maker may request the

operation to be repeated a number of times until
the air is completely elminated from the hydrau-
lic circuit. 

if this operation is not performed

correctly or if the machine is turned off, the basic
modes may be displayed, although the problem
is in fact still present. 

The appliance is set by default to automatically
make the following types of coffee:
•

espresso

•

small cup

•

medium cup

•

large cup

•

mug

To change the quantity, proceed as follows:
•

Press the         icon (B2) to enter the menu
(fig. 15). Press the         icons (B7) and (B8)
(fig. 2) until "PROGRAM COFFEE" is displa-
yed. 

•

Press the OK icon (B9).

•

Select the type of coffee you want to change
by pressing the        icons (B7) and (B8). 

•

Press the OK icon (B9) to confirm the type of
coffee you want to make. 

•

Use the          icons (B7) and (B8) to change
the quantity of coffee.  

The progress bar shows the quantity of cof-
fee selected. 

•

Press the OK icon (B9) again to confirm (or
the ESC icon (B6) to cancel the operation).

•

Press the ESC icon (B6) (fig. 18) twice to exit
the menu.

The appliance is now reprogrammed with the
new settings and is ready.

The coffee mill is preset in the factory and should
not require adjusting. However, if after making
the first few coffees you find that delivery is either
too fast or too slow (a drop at a time), this can be
corrected by adjusting the grinding adjustment
knob (fig. 14). 

For slower delivery and
creamier coffee, turn one
click anticlockwise (finer
pre-ground coffee).
For faster delivery (not a
drop at a time), turn one
click clockwise (coarser
pre-ground coffee).

•

Press the        icon (B4) (fig. 8) and select the
pre-ground coffee function. 

•

Extract the machine by pulling it outwards
using the handles (fig. 7). 

•

Lift the central lid, place one measure of pre-
ground coffee in the funnel (fig. 19), push the
appliance in then proceed as described in the
section "Making coffee using coffee beans". 
N.B.: You can make just one coffee at a time
by pressing the        icon (B10) (fig. 12).

•

After using the machine with pre-ground cof-