Aeg Electrolux pe4520-m Manual Do Utilizador
sing the icons (B7) and (B8).
The progress bar shows the quantity of cof-
fee selected.
The progress bar shows the quantity of cof-
fee selected.
• Press the OK icon (B9) to confirm (or the
ESC icon (B6) to cancel the operation.
•
Press the ESC icon (B6) (fig. 18) twice to exit
the menu.
the menu.
MAKING A NUMBER OF
CUPS OF COFFEE WITH THE
JUG FUNCTION
CUPS OF COFFEE WITH THE
JUG FUNCTION
Using this function you can automatically make a
number of cups of coffee (4, 6) directly in the jug
(A11) to keep the coffee hot.
•
number of cups of coffee (4, 6) directly in the jug
(A11) to keep the coffee hot.
•
Turn the jug lid until the arrow lines up with
the word OPEN and remove the lid.
Rinse the jug and lid.
the word OPEN and remove the lid.
Rinse the jug and lid.
•
Close the jug by turning the lid towards
CLOSE until it is tightly closed and then place
it under the coffee spout.
Always position the jug with the handle fa-
cing to the right or left as shown in the figure.
CLOSE until it is tightly closed and then place
it under the coffee spout.
Always position the jug with the handle fa-
cing to the right or left as shown in the figure.
The coffee spout (A13) must be fully raised
to enable the jug to be inserted.
"FILL BEAN CONT. AND WATER TANK,
EMPTY WASTE CONT., PRESS OK" is displa-
yed. Make sure the water tank is full, the bean
container is full enough and the waste coffee
container is completely empty.
to enable the jug to be inserted.
"FILL BEAN CONT. AND WATER TANK,
EMPTY WASTE CONT., PRESS OK" is displa-
yed. Make sure the water tank is full, the bean
container is full enough and the waste coffee
container is completely empty.
•
Press the OK icon (B9).
The type of coffee selected, for example
"EXTRA-MILD JUG", and the number of cups
The type of coffee selected, for example
"EXTRA-MILD JUG", and the number of cups
you want to make with the jug are displayed,
for example "JUG 4 CUPS".
for example "JUG 4 CUPS".
•
Confirm by pressing the icon (B14).
The display shows a progress bar which in-
dicates coffee making process.
When the progress bar is complete, the ap-
pliance finishes the process and automati-
cally goes back to the coffee jug function.
If on the other hand an incomplete progress
bar is displayed, this means that the cycle
has not been completed correctly. Remove
the jug and check the message which appe-
ars on the display, consulting the section "DI-
SPLAYED MESSAGES".
The display shows a progress bar which in-
dicates coffee making process.
When the progress bar is complete, the ap-
pliance finishes the process and automati-
cally goes back to the coffee jug function.
If on the other hand an incomplete progress
bar is displayed, this means that the cycle
has not been completed correctly. Remove
the jug and check the message which appe-
ars on the display, consulting the section "DI-
SPLAYED MESSAGES".
•
Remove jug and leave the lid in the CLOSE
position to keep the coffee hot.
position to keep the coffee hot.
•
To pour the coffee, turn the lid anticlockwise
until the arrow is lined up with the spout of
the jug.
until the arrow is lined up with the spout of
the jug.
Important!
When the coffee beans are in-
sufficient to complete the required function, the
appliance stops the process and waits for the
bean container to be filled again and the icon
(B14) to be pressed. For example, when you
want to make 4 cups of coffee but the beans are
insufficient, the appliance makes 2 cups then
stops making coffee. Fill the bean container and
press the icon (B14). Once the container has
been filled, the appliance makes the 2 remaining
cups only to reach the required number of 4
cups. If there is not enough water in the tank to
complete the required function or the waste cof-
fee container is full, the appliance interrupts the
process. To fill the water tank or empty the waste
coffee container, you must remove the jug. This
interrupts the programme. After rectifying the
problem, the programme must be started again.
In this case, you must take the amount of coffee
already delivered into account to avoid the jug
overflowing.
appliance stops the process and waits for the
bean container to be filled again and the icon
(B14) to be pressed. For example, when you
want to make 4 cups of coffee but the beans are
insufficient, the appliance makes 2 cups then
stops making coffee. Fill the bean container and
press the icon (B14). Once the container has
been filled, the appliance makes the 2 remaining
cups only to reach the required number of 4
cups. If there is not enough water in the tank to
complete the required function or the waste cof-
fee container is full, the appliance interrupts the
process. To fill the water tank or empty the waste
coffee container, you must remove the jug. This
interrupts the programme. After rectifying the
problem, the programme must be started again.
In this case, you must take the amount of coffee
already delivered into account to avoid the jug
overflowing.
18