Aeg Electrolux pe4520-m Manual Do Utilizador
24
2 litres under the hot water spout.
•
Press the OK icon (B9). Descaler flows out
of the hot water spout into the container
below.
The appliance displays: "DESCALING".
of the hot water spout into the container
below.
The appliance displays: "DESCALING".
•
The descale programme automatically per-
forms a series of deliveries and pauses.
forms a series of deliveries and pauses.
•
After about 30 minutes "DESCALE COM-
PLETE PLEASE CONFIRM" is displayed.
PLETE PLEASE CONFIRM" is displayed.
•
Press the OK icon (B9). "RINSING PLEASE
CONFIRM" is displayed.
CONFIRM" is displayed.
•
Empty the water tank, rinse to eliminate de-
scaler residues, then fill with clean water.
scaler residues, then fill with clean water.
•
Replace the tank."RINSING PLEASE CON-
FIRM" is displayed.
FIRM" is displayed.
•
Press the OK icon (B9) again. Hot water
flows out of the spout into the container
below and "RINSING" is displayed.
flows out of the spout into the container
below and "RINSING" is displayed.
•
Wait until "RINSING COMPLETE PLEASE
CONFIRM" is displayed.
CONFIRM" is displayed.
•
Press the OK icon (B9). “DESCALE COM-
PLETE” and "FILL TANK" is displayed. Fill the
tank again with clean water.
PLETE” and "FILL TANK" is displayed. Fill the
tank again with clean water.
•
The descale programme is now terminated
and the appliance is ready to make coffee
again.
NOTE: If descaling is interrupted before com-
pletion, the process must be begun again
from the beginning.
and the appliance is ready to make coffee
again.
NOTE: If descaling is interrupted before com-
pletion, the process must be begun again
from the beginning.
Important!
FAILURE TO DESCALE THE
APPLIANCE REGULARLY INVALIDATES THE
GUARANTEE.
GUARANTEE.
Resetting default values (reset)
E’ possibile ritornare alle impostazioni originali
della macchina (anche dopo che l’utente le ha
modificate) procedendo nel seguente modo:
•
della macchina (anche dopo che l’utente le ha
modificate) procedendo nel seguente modo:
•
Press the icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"RESET TO DEFAULT" is displayed.
and then the icons (B7) and (B8) until
"RESET TO DEFAULT" is displayed.
•
Press the OK icon (B9) and the appliance di-
splays "RESET TO DEFAULT PLEASE CON-
FIRM".
splays "RESET TO DEFAULT PLEASE CON-
FIRM".
•
press the OK button (B9) to reset the default
values;
values;
Statistics
This displays statistics relating to the machine.
To display, proceed as follows:
•
To display, proceed as follows:
•
Press the icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"STATISTICS" is displayed.
and then the icons (B7) and (B8) until
"STATISTICS" is displayed.
•
Press the OK icon (B9).
•
Press the icons (B7) and (B8) to verify:
- How many coffees and cappuccinos have
been made.
-
How many times the machine has been de-
scaled.
scaled.
-
The total number of litres of water delivered.
•
Press the ESC icon (B6) once to exit the fun-
ction or twice to exit the menu.
ction or twice to exit the menu.
Buzzer
This activates or deactivates the buzzer emitted
by the machine each time an icon is pressed or
an accessory is inserted/removed.
by the machine each time an icon is pressed or
an accessory is inserted/removed.
N.B.!
The buzzer is active by default.
•
Press the icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"BUZZER" is displayed.
and then the icons (B7) and (B8) until
"BUZZER" is displayed.
•
Press the OK icon (B9). "BUZZER PLEASE
CONFIRM" is displayed.
CONFIRM" is displayed.
•
Press the ESC icon (B6) to disable or the OK
icon (B9) to enable the buzzer.
icon (B9) to enable the buzzer.
•
Press the ESC icon (B6) to exit the menu.
Adjusting contrast
To increase or reduce the contrast of the display,
proceed as follows:
•
proceed as follows:
•
Press the icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"CONTRAST" is displayed.
and then the icons (B7) and (B8) until
"CONTRAST" is displayed.
•
Press the OK icon (B9).
•
Press the icons (B7) and (B8) until
the required display contrast is reached. The
progressive bar indicates the level of contrast
selected.
the required display contrast is reached. The
progressive bar indicates the level of contrast
selected.
•
Press the OK icon (B9) to confirm.
•
Press the ESC icon (B6) once to exit the fun-
ction or twice to exit the menu.
ction or twice to exit the menu.