Aeg Electrolux pe4520-m Manual Do Utilizador
PROBLEM
POSSIBLE CAUSE
REMEDY
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
If the problem cannot be resolved as described, contact Customer Services.
The coffee is not hot
•
The cups were not pre-
heated.
heated.
•
The brewing unit has coo-
led down because 2/3 mi-
nutes have elapsed since
the last coffee was made.
led down because 2/3 mi-
nutes have elapsed since
the last coffee was made.
•
The temperature set is too
low.
low.
•
Warm the cups by rinsing
them with hot water.
them with hot water.
•
Before making coffee,
preheat the brewing unit
by selecting the RINSING
function in the menu.
preheat the brewing unit
by selecting the RINSING
function in the menu.
• Change the set tempera-
ture (see paragraph
"Changing coffee tempe-
rature").
"Changing coffee tempe-
rature").
The coffee is not creamy
enough
enough
•
The coffee is ground too
coarsely.
coarsely.
•
Wrong type of coffee
•
Turn the grinding adju-
stment knob one click an-
ticlockwise towards "1"
while the coffee mill is in
operation (fig. 14).
stment knob one click an-
ticlockwise towards "1"
while the coffee mill is in
operation (fig. 14).
•
Use a type of coffee for
espresso coffee makers.
espresso coffee makers.
The coffee is delivered too
slowly or a drop at a time.
slowly or a drop at a time.
•
The coffee is ground too
finely.
finely.
•
Turn the grinding adju-
stment knob one click
clockwise towards "7"
while the coffee mill is in
operation (fig. 14).
Continue one click at a
time until coffee delivery
is satisfactory.
The effect is only visible
after delivering two cof-
fees.
stment knob one click
clockwise towards "7"
while the coffee mill is in
operation (fig. 14).
Continue one click at a
time until coffee delivery
is satisfactory.
The effect is only visible
after delivering two cof-
fees.
28