Alcatel-Lucent omniacces-voip gateway Manual Do Utilizador
VoIP Commands
Page 5-227
For each new H.323 call, the CCB number is incremented. The first call would be CCB 0, the
second would be CCB 1 and so on, as shown below where the RTCP port number is set one
number higher than the RTP port number, e.g., the starting RTP port number is 30001 (with a
base of 30000), and the starting RTCP port number is 30002.
second would be CCB 1 and so on, as shown below where the RTCP port number is set one
number higher than the RTP port number, e.g., the starting RTP port number is 30001 (with a
base of 30000), and the starting RTCP port number is 30002.
• On the first incoming H.323 call setup message, the starting RTP port number would be
30003, and the starting RTCP port number would be 30004.
• On the next incoming H.323 call setup message, the starting RTP port number would be
30004, and the starting RTCP port number would be 30005.
• On the subsequent incoming H.323 call setup message, the starting RTP port number
would be 30006, and the starting RTCP port number would be 30007, and so on.
Standard port assignments are as follows:
Gatekeeper User Datagram Protocol (UDP) Discovery Multicast Address: 224.0.1.41
Gatekeeper UDP Discovery Port (automatic discovery): 1718
Gatekeeper UDP Registration and Status Port (manual discovery): 1719
Endpoint Transmission Control Protocol (TCP) Call Signaling Port: 1720