Alpine DVE-5207 Manual Do Utilizador
32
-EN
Connections
• Connect properly.
Never connect to parts other than the ones indicated in these operating instructions.
• Also refer to the operating instructions of the other products in the system.
• A remote control eye is needed when a monitor made by another company is connected.
• A remote control eye is needed when a monitor made by another company is connected.
White/Brown REMOTE IN
GND
Black
BATTERY
Fuse
(7.5A)
Yellow
IGNITION
Red
Cable Colour
Cable Specifications
Yellow
White (L)
Red (R)
White/
Brown
Brown
Black
Yellow
Red
• Video Output Connector
This connector is used in combination with the video inputs
of another video product (AV head unit or TV monitor).
of another video product (AV head unit or TV monitor).
• Audio Output Connectors
These connectors are used in combination with a head unit
or TV monitor with audio input connectors, if the digital
output terminal is not connected.
or TV monitor with audio input connectors, if the digital
output terminal is not connected.
• Remote Control Input Lead
This lead is used in combination with an ALPINE monitor
with a remote control output lead.
with a remote control output lead.
• Ground Lead
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
• Battery Lead
Connect this lead to the positive (+) post of the vehicle’s battery.
• Switched Power Lead (Ignition)
Connect this lead to an open terminal on the vehicle’s fuse box
or another unused power source which provides (+) 12V only
when the ignition is turned on or in the accessory position.
or another unused power source which provides (+) 12V only
when the ignition is turned on or in the accessory position.
• Digital Output Terminal (Optical)
This terminal is used to connect DVE-5207 to ALPINE
digital audio processor (PXA-H701 etc.).
These products include a fiber optic cable that will plug
directly into the digital output terminal of the DVE-5207.
digital audio processor (PXA-H701 etc.).
These products include a fiber optic cable that will plug
directly into the digital output terminal of the DVE-5207.
• Remote Control Eye Jack
Connect the remote control eye to this jack. Not used when
using a monitor with a built-in remote control sensor unit. A
remote control eye is needed when a monitor made by
other company is connected.
using a monitor with a built-in remote control sensor unit. A
remote control eye is needed when a monitor made by
other company is connected.
To remote control
output lead
output lead
Connect to a metal
part of chassis body
with a screw
part of chassis body
with a screw
Remote Control Eye
(Sold Separately)
Ignition Key