Alpine ina-n033r Manual Do Utilizador
8
-EN
Radio Operation
SOURCE
Preset buttons (1 through 6)
A.ME
BAND
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
station you wish to store in the preset memory.
2
Press and hold the Preset button (1 through 6) that
you want to store the station on for at least 2 seconds.
The selected station is stored.
you want to store the station on for at least 2 seconds.
The selected station is stored.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM-1, FM-2, FM-3,
MW and LW).
onto the same band.
To use this procedure for other bands, simply select
the band desired and repeat the procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM-1, FM-2, FM-3,
MW and LW).
NOTE
If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
station, the current station will be cleared and replaced with the
new station.
Automatic Memory of Station Presets
1
Press the SOURCE button to select the radio mode.
2
Press the BAND button repeatedly until the desired
radio band is displayed.
radio band is displayed.
3
Press and hold the A. ME button for at least 2 seconds.
The frequency on the display continues to change
while the automatic memory is in progress. The tuner
will automatically seek and store 6 strong stations in
the selected band. They will be stored into buttons
Preset 1 to 6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in the preset location
No. 1.
The frequency on the display continues to change
while the automatic memory is in progress. The tuner
will automatically seek and store 6 strong stations in
the selected band. They will be stored into buttons
Preset 1 to 6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in the preset location
No. 1.
NOTE
If no stations are stored, the tuner will return to the original
station you were listening to before the auto memory procedure
began.
station you were listening to before the auto memory procedure
began.
Tuning to Preset Stations
1
Press the SOURCE button to select the radio mode.
2
Press the BAND button repeatedly until the desired
band is displayed.
band is displayed.
3
Press the station Preset button that has your desired
radio station in memory.
The display shows the band, preset number and
frequency of the station selected.
radio station in memory.
The display shows the band, preset number and
frequency of the station selected.