Alpine ina-n033r Manual Do Utilizador

An optional 6-disc or 12-disc CD Changer may be
connected to the INA-N033R if it is Ai-NET compatible.
With a CD Changer connected to the Ai-NET input of
the INA-N033R, the CD Changer will be controllable
from the INA-N033R.
Using the KCA-400C (the Multi-Changer Switching
device) or KCA-410C (Versatile Link Terminal) multiple
changers can be controlled by the INA-N033R.
See the Multi-Changer Selection section on this page for
selecting the CD Changers.

• The controls on the INA-N033R for CD Changer operation are

• The DVD changer (optional) is controllable from the INA-

Press the SOURCE button to activate the CHANGER
mode. The display shows the disc number and track
number.

Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer. The selected disc number appears in the
display and CD playback starts.

• After selecting the desired disc, you can operate in the same

• If the "FUNC" indicator is illuminated the Disc Select buttons

When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is
the same as for the 6-disc CD Changer. To select discs
numbered from 7 to 12, first press the "F" button. This
changes the "D" indicator to "d". Then press the
desired Preset button. With the "F" button activated, the
Preset buttons 1 to 6 will represent discs 7 to 12
respectively.

Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers, the
KCA-400C (Multi-Changer Switching device) must be
used. If you use 1 Switching device, you can connect up
to 4 CD Changers. If you use 2 Switching devices, you
can connect up to 6 CD Changers. When using KCA-
410C (Versatile Link Terminal), you can connect two
changers and two external outputs (AUX).

Press the SOURCE button to activate the CD Changer
mode.

Alternatively, press the SOURCE button on the Remote
Control (optional) to activate the CD Changer mode.
Proceed to Step 3 below to select the desired CD
Changer.

Press the BAND button on the Remote Control
(optional) to activate the CD Changer Selection mode.

The CD Changer Selection mode remains active for 3
seconds after Step 2 is performed. Press the BAND
button until the desired CD Changer indicator appears
on the display.

Alternatively press the BAND button on the Remote
Control until the desired changer indicator appears on
the display.

To operate the selected changer, see "CD Player
Operation" section.