Alpine cda-9830r Manual Do Utilizador
20
-EN
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, and MP3, will be
able to reproduce the music clearly even in cars with a lot of road
noise.
regardless of the music source. The FM radio, CD, and MP3, will be
able to reproduce the music clearly even in cars with a lot of road
noise.
1
Press MX to select MX ON.
2
Press SOURCE/POWER to select the source to
which you want to apply MX (Media Xpander).
which you want to apply MX (Media Xpander).
3
Press and hold MX for at least 2 seconds to
activate the level setting mode.
activate the level setting mode.
4
Turn the Rotary encoder to select your preferred
level or OFF.
level or OFF.
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and
produces well balanced sound at all frequencies.
produces well balanced sound at all frequencies.
CD/WAV (MX level 1 to 3):
CD mode processes a large quantity of data. This data
processing power takes advantage of CD quality sound
sources.
processing power takes advantage of CD quality sound
sources.
MP3/WMA (MX level 1 to 3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close to
the original.
compression. This reproduces a well-balanced sound close to
the original.
DVD (Video CD)
(MOVIE MX level 1 to 2):
(MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(MUSIC MX level 1):
A DVD or Video CD contains a large quantity of data such as
music clip. MX uses this data to reproduce the sound
accurately.
music clip. MX uses this data to reproduce the sound
accurately.
AUX (MX level 1):
Choose the MX mode (MP3, MUSIC, or MOVIE) that
corresponds to the media connected.
If two external devices are connected, a different MX
mode for each media can be selected.
corresponds to the media connected.
If two external devices are connected, a different MX
mode for each media can be selected.
5
Press Rotary encoder to return to normal mode.
• To cancel MX mode for all music sources, press MX to turn MX off.
• MX mode is automatically cancelled if no operation is performed
• MX mode is automatically cancelled if no operation is performed
within 15 seconds.
• Each music source, such as FM radio, CD, and MP3/WMA can
have its own MX setting.
• On disks with both MP3/WMA and CD-DA, when the source
changes from “MP3/WMA to CD-DA” or “CD-DA to MP3/
WMA”, MX-mode switching may delay playback slightly.
WMA”, MX-mode switching may delay playback slightly.
• Setting to MX OFF sets MX mode of each music source to OFF.
• This function is inoperable when DEFEAT is set to ON.
• There is no MX mode for MW, LW radio.
• If an audio processor with the MX function (PXA-H700, etc.) is
• This function is inoperable when DEFEAT is set to ON.
• There is no MX mode for MW, LW radio.
• If an audio processor with the MX function (PXA-H700, etc.) is
connected, its own MX processing is applied to the music source.
Since the processor MX settings may not match the head unit, the
audio processor needs to be adjusted. For details, refer to the
Owner’s Manual of the audio processor.
Since the processor MX settings may not match the head unit, the
audio processor needs to be adjusted. For details, refer to the
Owner’s Manual of the audio processor.
• When entering RDS signals, the MX operation cannot be
performed.
Adjusting and Storing the Time Correction
Before performing the following procedures, refer to "About Time
Correction" (page 18).
Correction" (page 18).
1
Press and hold MENU for at least 2 seconds.
2
Press MENU to select T.CORR (T-CORR for
CDA-9830R).
CDA-9830R).
3
Press g or f to make time corrections.
Each press changes the mode as follows:
Bass Focus mode
↔ Time Correction mode
4
Press BAND/TEL. to select a speaker to be
adjusted.
adjusted.
CDA-9831R
Front – L
Front – L
→ Front – R → Rear – L → Rear – R → Front – L
CDA-9830R
F – L
F – L
→ F – R → R – L → R – R → F – L
5
Turn the Rotary encoder to adjust the desired
time correction value.
time correction value.
To store the adjusted contents
1) Press and hold the preset button (1 or 2) for at least 2
seconds to store the adjusted contents to that button.
6
Repeat step 4 and 5 to set another speaker.
7
Press the Rotary encoder to confirm the
adjusted contents.
adjusted contents.
The adjusted contents are not stored if the Rotary encoder
is not pressed.
is not pressed.
8
After setting, press and hold MENU for at least 2
seconds to return to normal mode, or press MENU
and select RETURN return to to normal mode.
seconds to return to normal mode, or press MENU
and select RETURN return to to normal mode.
• If no operation is performed in 15 seconds, the unit returns to
normal mode.
Recalling the Stored Time Correction
Settings
Settings
1
Press and hold MENU for at least 2 seconds.
2
Press MENU to select T.CORR (T-CORR for
CDA-9830R).
CDA-9830R).
3
Press g or f to make time corrections.
Each press changes the mode as follows:
Bass Focus mode
↔ Time Correction mode
4
Press the preset button (1 or 2) to which your
desired time correction is assigned.
desired time correction is assigned.
5
Press and hold MENU for at least 2 seconds to
return to normal mode, or press MENU and select
RETURN to return to normal mode.
return to normal mode, or press MENU and select
RETURN to return to normal mode.
• Time Correction mode is automatically cancelled if no operation is
performed within 15 seconds.