Alpine cda-7893r Manual Do Utilizador

Página de 44
10
-EN
Basic Operation
Quick Searching Function
You can easily select tracks and files.
1
Press the SOURCE button to set the desired source
mode.
( CD mode is explained here as an example)
2
When setting the CD mode, press and hold the Q.S.
button for at least 2 seconds. The mode changes to the
Q.S. (Quick Search) setting.
3
Select a desired track by turning the Rotary encoder
to the right or left.
• CD/Changer mode: Track can be selected.
• MP3 mode: File number can be selected.
4
When the setting is completed, the Q.S. mode is
canceled by pressing the Rotary encoder.
NOTE
The Q.S. mode is automatically canceled after 10 seconds if no
buttons are pressed during step 2 and 3.
Displaying the Title/Text
It is possible to display the CD title if the title has been
previously inputted. For details, see “Titling Discs” (page
11). Text information, such as the disc name and the
track name, will be displayed if playing a CD text
compatible disc. It is also possible to display the folder
name, the file name, and the ID3 tag, etc. while playing
MP3 files.
1
Press the TITLE button.
The mode will change every time the button is
pressed.
About “Title”  and “Text”
Title:
With this device, it is possible to input the CD
name (refer to page 11). This inputted name is
referred to as a “title.”
You cannot input or display titles on MP3 discs.
Text:
Text compatible CDs contain text information such
as the disc name and track name. Such text
information is referred to as “text.”
CD mode:
MP3 mode:
∗1
Displayed during playback of a disc with CD Text.
“NO TEXT” will be displayed when the CD
contains no text data.
∗2
If an MP3 file contains ID3 tag information, all the
ID3 tag information is displayed  (e.g., track name,
artist name, and album name).
All other tag data is ignored.
"NO TAG" will be displayed when an MP3 file
contains no ID3 tag information.
∗3
The recording sampling rate and bit rate of the
MP3 file are displayed.
NOTES
• Some characters may not be displayed correctly with this
device, depending on the character type.
• The CD changer must also be CD Text compatible for the
Text information to be displayed.
• When the Scroll Setting (refer to page 24) is set to “SCR
MANUAL”, press and hold the TITLE button for at least 3
seconds to scroll the Text information only once (TEXT
DISPLAY, FOLDER NAME DISPLAY, FILE NAME
DISPLAY or ID3 TAG DISPLAY mode).
• “NO SUPPORT” is displayed when the desired text
information cannot be displayed on this unit.
• If the title was not previously input, “NO TITLE” is
displayed.
SOURCE
Rotary encoder /Q.S.
 -/J
DN
f UP
TITLE
ELAPSED TIME DISPLAY
TEXT DISPLAY (DISC NAME)
∗1
TEXT DISPLAY (TRACK NAME)
∗1
TITLE DISPLAY
ELAPSED TIME DISPLAY
FOLDER NAME DISPLAY
FILE NAME DISPLAY
ID3 TAG DISPLAY
∗2
FRAME DISPLAY
∗3