Alpine cda-9854r Manual Do Utilizador
7
-EN
01GB05CDA-9854R.fm
ALPINE CDA-9852R 68-04123Z53-B (EN)
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press
(OPEN) to open the front panel, then
remove it.
3
Press RESET with a ballpoint pen or similar pointed
object.
object.
Adjusting Volume
Turn the Rotary encoder until the desired sound is obtained.
Listening to Radio
1
Press SOURCE/POWER until a radio frequency
appears on the display.
appears on the display.
2
Press BAND repeatedly until the desired radio band
is displayed.
is displayed.
F1
(FM1)
F2
(FM2)
F3
(FM3)
MW
LW
F1 (FM1)
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode)
SEEK (Local mode)
OFF (Manual mode)
DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
or
to tune in the desired station.
Holding down
or
will change the frequency
continuously.
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
The display shows the band, preset number and station
frequency memorized.
• A total of 30 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2, FM3, MW and LW).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Controllable With Remote Control
The CDA-9854R/CDA-9852RB/CDA-9852RR can be
controlled with an optional Alpine remote control. For details,
consult your Alpine dealer.
Point the optional remote control transmitter at the remote
control sensor.
controlled with an optional Alpine remote control. For details,
consult your Alpine dealer.
Point the optional remote control transmitter at the remote
control sensor.
Connectable to Remote Control Interface Box
You can operate this unit from the vehicle’s control unit when
an Alpine Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
an Alpine Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
RESET switch
Remote control sensor
Radio
SOURCE/POWER
TUNE/A.ME
BAND
MODE
Preset buttons
(1 through 6)
(1 through 6)
Rotary
encoder
encoder
FUNC.
01GB00CDA-9854R.book Page 7 Thursday, November 10, 2005 2:42 PM