Alpine cda-9883r Manual Do Utilizador

Página de 42
9
-EN
01GB05CDA-9883R.fm
ALPINE CDA-9883R 68-08564Z11-A (EN)
Setting RDS Reception Mode and 
Receiving RDS Stations
The RDS (Radio Data System) is a radio information system using the 
57 kHz subcarrier of regular FM broadcast. The RDS allows you to 
receive a variety of information such as traffic information, station 
names, and to automatically re-tune to a stronger transmitter that is 
broadcasting the same programme.
1
Press FUNC./SETUP to activate the function mode.
2
Press 1 AF to activate the RDS mode.
3
Press 
 or 
 to tune in the desired RDS 
station.
4
Press 1 AF again to deactivate the RDS mode.
5
Press FUNC./SETUP to activate the preset mode.
• When the “Setting PTY31 (Emergency Broadcast) reception” (refer 
to page 10) is set to on, if the unit receives the PTY31 (Emergency 
Broadcast) signal, the unit will show “ALARM” in the display 
automatically.
• Operate the unit while the 
 indicator lights up. If no operation 
is performed for 10 seconds, the 
 indicator goes out.
The RDS digital data includes the following:
Recalling Preset RDS Stations
1
Press FUNC./SETUP to activate the function mode.
2
Press 1 AF to activate the RDS mode.
3
Press FUNC./SETUP to activate the preset mode.
4
Make sure that the function mode returns to preset 
mode, and then press the preset button in which 
your desired RDS station is preset.
If the preset station’s signal is weak, the unit automatically 
searches and tunes to a stronger station in the AF 
(Alternative Frequencies) list.
5
If the preset station and the stations in the AF list 
cannot be received:
When the PI SEEK setting is on (refer to “PI SEEK Setting” 
on page 10), the unit searches again for a station in the PI 
(Programme Identification) list.
If there are still no stations receivable in the area, the unit 
displays the frequency of the preset station and the preset 
No. disappears.
If the signal level of the Regional (Local) station being tuned 
becomes too weak to receive, press the same preset button 
to tune in a Regional station in other district.
• For presetting the RDS stations, refer to the Radio Operation section. 
The RDS stations can be preset in the F1, F2 and F3 bands only.
• Operate the unit while the 
 indicator lights up. If no operation 
is performed for 10 seconds, the 
 indicator goes out.
Receiving RDS Regional (Local) 
Stations
1
Press and hold FUNC./SETUP for at least 2 
seconds to activate the SETUP mode.
2
Turn the Rotary encoder to select RDS Regional, 
and then press 
/
/ENT.
3
Turn the Rotary encoder to select ON or OFF.
In the OFF mode, the unit automatically keeps receiving the 
related local RDS station.
4
Press and hold FUNC./SETUP for at least 2 
seconds to return to normal mode.
• Pressing AUDIO/RTN during the procedure will return to the 
previous mode.
• If no operation is performed for 60 seconds in the SETUP mode, the 
setting mode is cancelled.
RDS
PI
Programme Identification
PS
Programme Service Name
AF
List of Alternative Frequencies
TP
Traffic Programme
TA
Traffic Announcement
PTY
Programme Type
EON
Enhanced Other Networks
1 AF NEWS 2
FUNC./SETUP
TITLE
BAND/TA
Rotary encoder
/ /
ENT
3 PTY
AUDIO/RTN
01GB00CDA-9883R.book  Page 9  Friday, November 17, 2006  8:25 PM