Alpine cda-9833r Manual Do Utilizador
26
-EN
Setting an Amplifier Link
With an external Amplifier Link compatible amplifier MRD-M501 or
MRD-M301 is connected, the amplifier settings are adjustable from the
head unit. A maximum of 8 external amplifiers can be adjusted.
MRD-M301 is connected, the amplifier settings are adjustable from the
head unit. A maximum of 8 external amplifiers can be adjusted.
1
Press and hold MENU for at least 2 seconds.
2
Press MENU to select A-Link.
3
Press g or f to select AMP1 to 8, or BASS
VOLUME.
VOLUME.
To set the BASS VOLUME
4
Turn the Rotary encoder to adjust the level, then
press the Rotary encoder.
press the Rotary encoder.
5
When adjustment has been completed, press and
hold MENU for at least 2 seconds to return to
normal mode, or press MENU and select
RETURN to return to normal mode.
hold MENU for at least 2 seconds to return to
normal mode, or press MENU and select
RETURN to return to normal mode.
To set the Amplifier
4
Press BAND/TEL. to select from the following
setting items to be adjusted.
setting items to be adjusted.
INPUT → LOW PASS → SUBSONIC → P-EQ → BASS COMP
→ T.CORR → PHASE → TURN ON DELAY→ OUTPUT
DISABLE (SAFE) → INPUT
→ T.CORR → PHASE → TURN ON DELAY→ OUTPUT
DISABLE (SAFE) → INPUT
5
Turn the Rotary encoder to change the settings.
6
Press the Rotary encoder.
Repeat steps 5 and 6 (above) if there are other items to
set in step 4.
set in step 4.
7
Repeat the steps 4 to 6 (above) if other settings
need to be adjusted.
need to be adjusted.
To set another amplifier, return to the step 3.
To store the adjusted contents
1) While adjusting the mode, press and hold either button
(1 or 2) for at least 2 seconds.
The adjusted contents are stored.
To recall adjusted and stored contents
1) While adjusting the mode, press either button (1 or 2).
The adjusted and stored contents are recalled.
8
When adjustment has been completed, press and
hold MENU for at least 2 seconds to return to
normal mode, or press MENU and select
RETURN to return to normal mode.
hold MENU for at least 2 seconds to return to
normal mode, or press MENU and select
RETURN to return to normal mode.
To easily recall adjusted and stored contents
1) Press MENU to select A-Link.
2) Press g or f to select AMP 1 to 8.
3) Turn the Rotary encoder to select Preset 1 or Preset 2.
4) Press and hold MENU for at least 2 seconds to return to
normal mode, or press MENU and select RETURN to
return to normal mode.
return to normal mode.
• For details of each of the settings, refer to the Owner's Manual of
the external amplifier.
• If amplifier settings are made on the unit, do not then change the
setting with the amplifier buttons as the amplifier display may not
match the operations of the unit.
match the operations of the unit.
• “No Link” is displayed if the amplifier is removed or its power
cannot be turned on, etc.
Displaying the External Amplifier Information
When an external Amplifier Link compatible amplifier is connected,
the external amplifier's information (voltage, electric current,
temperature) can be shown in the display of the head unit.
the external amplifier's information (voltage, electric current,
temperature) can be shown in the display of the head unit.
1
Press TITLE in the Radio or CD mode to switch
the display of the external amplifier information.
the display of the external amplifier information.
• For switching the display, refer to the section “Displaying the Title/
Text” (page 23).
CDA-9835R
• The temperature display is indicated for animation display
pattern1 and animation display pattern2 in the section “Switching
the Display modes” (page 6).
the Display modes” (page 6).
CDA-9833R
• To switch the display between Celsius and Fahrenheit, refer to
page 30.
AMPERE:2.9A VOLTAGE:10.1V
Voltage Display
Electric current
Display
Display
75.0°
F
12.4V 25.6A
Temperature Display
Electric current
Display
Display
Voltage Display