Alpine cda-9833r Manual Do Utilizador
29
-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
The common operation for SETUP is step 1 to 4 as
follows. You will find further information about each
SETUP menu on the page 29 and 30.
follows. You will find further information about each
SETUP menu on the page 29 and 30.
1
Press MENU to select the SETUP mode.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
menu.
(e.g. Select BEEP)
Here is the explanation for CDA-9835R display
example.
example.
FM-LEVEL → RDS REGIONAL*
1
→ PI SEEK*
2
→ TUNER
MODE → DIMMER → SUBWOOFER → PLAY MODE → BEEP
→ TEXT SCROLL → INT MUTE → INT AUDIO → AUX IN →
(AUX NAME)*
→ TEXT SCROLL → INT MUTE → INT AUDIO → AUX IN →
(AUX NAME)*
3
→ POWER−IC → TELEPHONE*
4
→ LCD
CONTRAST*
5
→ TW SETUP → A LINK TEMP*
6
→ BGV
SELECT*
7
→ DEMO → FONT SELECT*
8
→ FM-LEVEL
*
1
Refer to “Receiving RDS Regional (Local) Stations” (page 9).
*
2
Refer to “PI SEEK Setting” (page 10).
*
3
Displayed only when AUX is ON.
*
4
Telephone is displayed when the Alpine MobileHub is connected.
Refer to “Setting the Automatic Calling” (page 31).
Refer to “Setting the Automatic Calling” (page 31).
*
5
CDA-9833R only.
*
6
A LINK TEMP is displayed when an external amplifier is
connected.
connected.
*
7
CDA-9835R only.
*
8
CDA-9833R only.
3
Turn the Rotary encoder to change the setting.
(e.g. Select BEEP ON or BEEP OFF.)
4
Press and hold MENU for at least 2 seconds to
return to normal mode, or press MENU and select
RETURN to return to normal mode.
return to normal mode, or press MENU and select
RETURN to return to normal mode.
Sound Customizing
Adjusting Source Signal Levels
FM-LEVEL HIGH (Initial setting) / FM-LEVEL LOW
If the difference in volume level between the CD player and FM radio
is too great, adjust the FM signal level.
is too great, adjust the FM signal level.
Switching the Tuner Mode
NORMAL (Initial setting) / HI-FI / STABLE
This unit incorporates the MAX TUNE PRO for the highest quality
tuner audio. Moreover, you can choose between three settings to suit
your own personal sound preferences and usage.
tuner audio. Moreover, you can choose between three settings to suit
your own personal sound preferences and usage.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
• If you find the sound is very noisy while listening to the tuner in Hi-
Fi mode, we recommend you change to Normal mode.
Subwoofer On and Off
SUBWOOFER ON (Initial setting) / SUBWOOFER OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output phase and level.
subwoofer output phase and level.
1 Press the Rotary encoder repeatedly to select the
SUBWOOFER mode.
SUBWOOFER → BALANCE → FADER → DEFEAT →
VOLUME → SUBWOOFER
VOLUME → SUBWOOFER
• If you set the 2WAY/3WAY switch (pages 40 to 42) to 3WAY, you
cannot adjust the FADER mode.
2 Press g or f.
The subwoofer output phase is toggled SUBWOOFER
NORMAL (0°) or SUBWOOFER REVERS (180°).
To adjust the level, turn the Rotary encoder.
NORMAL (0°) or SUBWOOFER REVERS (180°).
To adjust the level, turn the Rotary encoder.
Setting the Subwoofer Output
STEREO (Initial setting) / MONO
You can set the subwoofer output to stereo or monoaural. Make sure
to set the correct output for your subwoofer type.
to set the correct output for your subwoofer type.
STEREO: Subwoofer stereo (L/R) output
MONO: Subwoofer monaural output
MONO: Subwoofer monaural output
Setting the Response Slope for the High
Range Speaker (TW SETUP)
Range Speaker (TW SETUP)
MAKER’S (Initial setting) / USER’S
Depending on the response characteristics of the speaker, care should
be taken when setting the response slope of the high range speaker to
FLAT in 3-way mode (see “Adjusting and Storing the Crossover
Settings” on page 19), as speaker damage may result.
be taken when setting the response slope of the high range speaker to
FLAT in 3-way mode (see “Adjusting and Storing the Crossover
Settings” on page 19), as speaker damage may result.
MAKER’S: As protection from possible speaker damage, FLAT
cannot be set for the response slope of the high
range speaker in 3-way mode.
range speaker in 3-way mode.
USER’S:
The FLAT setting is possible in 3-way mode.
• A message is displayed when the response slope for the high range
speaker is set to FLAT in 3-way mode.
Sound (Beep) Guide Function
BEEP ON (Initial setting) / BEEP OFF
This function will give audible feedback with varying tones
depending upon the button pressed.
depending upon the button pressed.
Visual Customizing
Dimmer Control
DIMMER AUTO (Initial setting) / DIMMER MANUAL
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON.This
mode is useful if you feel the unit's backlighting is too bright at night.
brightness of the unit with the head lights of the vehicle ON.This
mode is useful if you feel the unit's backlighting is too bright at night.
f
g
BAND/TEL.
Rotary encoder
SOURCE/
POWER
POWER
MENU
Continued