Alpine cda-9835r Manual Do Utilizador
10
-EN
PI SEEK Setting
1
Press MENU to select the SETUP mode.
2
Select the “PI SEEK” mode by pressing
g or f.
g or f.
3
Choose either ON or OFF by turning the Rotary
encoder.
encoder.
4
Press and hold MENU for at least 2 seconds to
return to normal mode, or press MENU and select
RETURN to return to normal mode.
return to normal mode, or press MENU and select
RETURN to return to normal mode.
Receiving Traffic Information
1
Press T.INFO so that the “T.INFO” indicator lights
up.
up.
2
Press g or f to select your desired traffic
information station.
information station.
When a traffic information station is tuned in, the “TP”
indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast, the
unit is set in the standby mode. When a traffic information
broadcast begins, the unit automatically receives it and
the display shows “TRF-INFO” for a few seconds and
returns to the PS display.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being broadcast, the
unit is set in the standby mode. When a traffic information
broadcast begins, the unit automatically receives it and
the display shows “TRF-INFO” for a few seconds and
returns to the PS display.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
• If the traffic information broadcast signal falls below a certain
level, the unit remains in the receiving mode for 70 seconds. If the
signal remains below a certain level for over 70 seconds, the
“T.INFO” indicator blinks.
signal remains below a certain level for over 70 seconds, the
“T.INFO” indicator blinks.
• If you do not want to listen to the traffic information being
received, lightly press T.INFO to skip that traffic information
message. The T.INFO mode will remain in the ON position to
receive the next traffic information message.
message. The T.INFO mode will remain in the ON position to
receive the next traffic information message.
• If the volume level is changed while receiving traffic information,
the changed volume level will be memorized. When traffic
information is received next time, the volume level will be
automatically adjusted to the level memorized.
information is received next time, the volume level will be
automatically adjusted to the level memorized.
• In the T.INFO mode, the SEEK tuning selects only the TP stations.
PTY (Programme Type) Tuning
1
Press F to activate function mode (for the CDA-
9833R model, press F to illuminate the “FUNC”
indicator).
9833R model, press F to illuminate the “FUNC”
indicator).
2
Press 3/PTY to activate the PTY mode, while the
unit is in Radio (FM receiving) mode.
unit is in Radio (FM receiving) mode.
The Programme Type of the station being currently received
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, “NO PTY” will be
displayed for 5 seconds.
If no RDS station can be received, the display shows “NO
PTY.”
will be displayed for 5 seconds.
If there is no receivable PTY broadcast, “NO PTY” will be
displayed for 5 seconds.
If no RDS station can be received, the display shows “NO
PTY.”
• If no operation is performed within 5 seconds after pressing 3/PTY,
the PTY mode will be automatically cancelled.
3
Press g and f within 5 seconds after
activating the PTY mode to choose the desired
programme type while the PTY (programme type)
is being displayed.
activating the PTY mode to choose the desired
programme type while the PTY (programme type)
is being displayed.
Each press scrolls the programme type by one.
4
Press 3/PTY within 5 seconds after selecting the
programme type to start searching for a station in
the selected programme type.
programme type to start searching for a station in
the selected programme type.
The chosen programme type display blinks during
searching and lights when a station is found.
searching and lights when a station is found.
If no PTY station is found, “NO PTY” will be displayed for 5
seconds.
seconds.
5
Press F to activate the normal mode (for the CDA-
9833R model, the “FUNC” indicator goes out).
9833R model, the “FUNC” indicator goes out).
• When the function mode is activated (the “FUNC” indicator for
the CDA-9833R model is lit), perform the operation. The function
mode returns to normal mode if no operation is performed within 5
seconds for the CDA-9833R model.
mode returns to normal mode if no operation is performed within 5
seconds for the CDA-9833R model.
LIGHT M ↔ CLASSICS ↔ OTHER M