Alpine CDE-9843R Manual Do Utilizador
18
-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, choose from Sound Customizing,
Visual Customizing, etc., to make your desired settings.
usage. From the SETUP menu, choose from Sound Customizing,
Visual Customizing, etc., to make your desired settings.
CDE-9845RX
CDE-9843RX/CDE-9841R
A typical SETUP procedure is shown in steps 1 to 4
as follows. See below for further information about
each SETUP menu.
as follows. See below for further information about
each SETUP menu.
1
Press and hold F/SETUP for at least 2 seconds.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
menu.
(e.g. Select SUBW)
CDE-9845RX
FM-LEVEL
↔ RDSREG*
1
↔ PI SEEK*
2
↔ DIMMER*
3
↔
SUBW
↔ CDDA / CDDA/MP3 ↔ SCROLL TYPE ↔ SCROLL
↔ POWER IC ↔ DEMO ↔ FM-LEVEL
CDE-9843RX
FM-LV
↔ REG*
1
↔ PISK*
2
↔ SUBW ↔ CD-DA/CDDA/MP3 ↔
TYPE1/TYPE2
↔ SCR ↔ PWR ↔ FM-LV
CDE-9841R
FM-LV
↔ REG*
1
↔ PISK*
2
↔ SUBW ↔ PWR ↔ FM-LV
*
1
Refer to “Receiving RDS Regional (Local) Stations” (page 7)
*
2
Refer to “PI SEEK Setting” (page 8)
*
3
CDE-9845RB only
3
Press BAND to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press F/SETUP again.
The display returns to normal mode.
Sound Customizing
Adjusting Source Signal Levels
CDE-9845RX:
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
CDE-9843RX/CDE-9841R:
FM-LV HI (Initial setting) / FM-LV LOW
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
CDE-9843RX/CDE-9841R:
FM-LV HI (Initial setting) / FM-LV LOW
If the difference in volume level between the CD player and FM radio
is too great, adjust the FM signal level.
is too great, adjust the FM signal level.
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
subwoofer output level.
1 Press the Rotary encoder (CDE-9845RX) or MODE/
LOUD (CDE-9843RX/CDE-9841R) repeatedly to select
the SUBW mode.
the SUBW mode.
BASS
→ TREBLE → SUBW → BALANCE → FADER →
DEFEAT
→ VOLUME → BASS
2 To adjust the level, turn the Rotary encoder (CDE-
9845RX) or press
4 and 3 (CDE-9843RX/CDE-9841R).
Visual Customizing
Dimmer Control (CDE-9845RB only)
DIMMER AUTO (Initial setting) / DIMMER MANU
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This
mode is useful if you feel the unit's button lighting is too bright at
night.
brightness of the unit with the head lights of the vehicle ON. This
mode is useful if you feel the unit's button lighting is too bright at
night.
• If you vehicle should have a dimmer control for the
dashboardlights, never connect the DIMMER cable (orange) of the
radio to this dimmer control.
radio to this dimmer control.
Scroll Setting (CDE-9845RX/CDE-9843RX only)
CDE-9845RX:
SCROLL AUTO / SCROLL MANU (Initial setting)
CDE-9843RX:
SCR AUTO / SCR MANU (Initial setting)
SCROLL AUTO / SCROLL MANU (Initial setting)
CDE-9843RX:
SCR AUTO / SCR MANU (Initial setting)
This CD player can scroll the disc and track names recorded on CD-
TEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
TEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
AUTO : The CD text information, the text information of folder
and file names, and the tags are scrolled
automatically. Scrolling only takes place when the
information cannot be shown in the display in its
entirety.
automatically. Scrolling only takes place when the
information cannot be shown in the display in its
entirety.
MANU : The display is scrolled only when a disc is
loaded or when a track is changed, etc.
• The unit scrolls CD text names, folder names, file names or tag
display. The disc titles input manually (page 17) cannot be scrolled.
Scroll Type Setting (CDE-9845RX/CDE-9843RX only)
TYPE1 (Initial setting) / TYPE2
Choose from two scrolling methods.
Select the type you prefer.
Select the type you prefer.
TYPE1
: The characters scroll sequentially, appearing from
the right side of the display.
TYPE2
: The characters are displayed one by one, and
disappear one by one from the left side of the
display after the screen is filled up with the
characters.
display after the screen is filled up with the
characters.
Demonstration (CDE-9845RX only)
DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display and sound.
• To quit Demo mode, set to DEMO OFF.
BAND
g
f
F/SETUP
Rotary encoder
BAND
g f
F/SETUP
MODE/
LOUD
LOUD
4
3