Alpine cde-9827r Manual Do Utilizador
15
-EN
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own
tonal preference.
tonal preference.
1
Press CENTER f to select the Treble (treble centre
frequency) Control mode.
frequency) Control mode.
BASS → TREBLE → normal mode → BASS
2-1
Setting the treble Centre frequency:
Press g or f to select the desired treble
centre frequency.
centre frequency.
10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz ↔ 10.0kHz
The displayed Treble frequency is emphasized.
2-2
Setting the treble level:
Turn the Rotary encoder to select the desired
treble level (–7~+7).
treble level (–7~+7).
You can emphasize the treble frequency.
• If no operation is performed within 15 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for
all other sources (FM, MW (LW), CD, etc.).
Treble frequency settings adjusted for one source are effective for
all other sources (FM, MW (LW), CD, etc.).
• This function is inoperable when DEFEAT is set to ON.
Setting the Bass Type
This function allows for 3 different bass type settings. Select the one
that appeals to you the most.
that appeals to you the most.
1
Press and hold CENTER f for at least 2 seconds to
set the bass type.
set the bass type.
2
Press g or f within 15 seconds to select the
desired type (1 through 3).
desired type (1 through 3).
TYPE 1 will sound best if you have a subwoofer in your
system. Use TYPE 2 or 3 if you are using small diameter
speakers.
system. Use TYPE 2 or 3 if you are using small diameter
speakers.
3
Press and hold CENTER f for at least 2 seconds to
return to normal mode.
return to normal mode.
• Bass centre frequency and bass band width previously set are
replaced when selecting TYPE 1 through 3. When bass type is set
to OFF, your previous settings are restored.
to OFF, your previous settings are restored.
• Bass type is not selectable when connected to an external audio
processor.
Setting the MX Mode
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, and MP3, will be
able to reproduce the music clearly even in cars with a lot of road
noise.
regardless of the music source. The FM radio, CD, and MP3, will be
able to reproduce the music clearly even in cars with a lot of road
noise.
1
Press MX to select MX ON.
2
Press SOURCE/POWER to select the source to
which you want to apply MX (Media Xpander).
which you want to apply MX (Media Xpander).
3
Press and hold MX for at least 2 seconds to
activate the level setting mode.
activate the level setting mode.
4
Turn the Rotary encoder to select your preferred
level or OFF.
level or OFF.
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and
produces well balanced sound at all frequencies.
produces well balanced sound at all frequencies.
CD/WAV (MX level 1 to 3):
CD mode processes a large amount of data during playback.
MX takes advantage of this large data quantity to reproduce a
more clear, clean output.
MX takes advantage of this large data quantity to reproduce a
more clear, clean output.
MP3/WMA (MX level 1 to 3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close to
the original.
compression. This reproduces a well-balanced sound close to
the original.
5
Press Rotary encoder to return to normal mode.
• To cancel MX mode for all music sources, press MX to turn MX off.
• MX mode is automatically cancelled if no buttons are pressed
• MX mode is automatically cancelled if no buttons are pressed
within 15 seconds.
• Each music source, such as FM radio, CD, and MP3/WMA can
have its own MX setting.
• On disks with both MP3/WMA and CD-DA, when the source
changes from “MP3/WMA to CD-DA” or “CD-DA to MP3/
WMA”, MX-mode switching may delay playback slightly.
WMA”, MX-mode switching may delay playback slightly.
• Setting to MX OFF sets MX mode of each music source to OFF.
• This function is inoperable when DEFEAT is set to ON.
• There is no MX mode for MW,LW radio.
• When entering RDS signals, the MX operation cannot be performed.
• This function is inoperable when DEFEAT is set to ON.
• There is no MX mode for MW,LW radio.
• When entering RDS signals, the MX operation cannot be performed.