Alpine cdm-9805r Manual Do Utilizador

Press the 5 ( 

 ) button in the play or pause

mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence.

To cancel M.I.X. play, press the 5 ( 

 ) button

again.

NOTE
In case a 6-disc CD changer is connected (CDM-
9807RB/CDM-9805R/CDM-9803RM/CDM-9803R
only):
Press the F/SETUP button so that the "FUNC"
indicator lights up, then go to step 1.
Press the F/SETUP button to return to the normal
mode.
The "FUNC" indicator light goes out.

Press the 6 ( 

 ) button to activate the Scan

mode.
The first 10 seconds of each track will be played
back in succession.

To stop scanning, press the 6 ( 

 ) button to

deactivate the Scan mode.

NOTE
In case a 6-disc CD changer is connected (CDM-
9807RB/CDM-9805R/CDM-9803RM/CDM-9803R
only):
Press the F/SETUP button so that the "FUNC"
indicator lights up, then go to step 1.
Press the F/SETUP button to return to the normal
mode.
The "FUNC" indicator light goes out.

If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-9807RB/CDM-9805R/CDM-9803RM/
CDM-9803R, you can control the CD Changer
using the CDM-9807RB/CDM-9805R/CDM-
9803RM/CDM-9803R.

NOTE
The CD controls on the CDM-9807RB/CDM-9805R/
CDM-9803RM/CDM-9803R for the CD Changer
operation are functional only when the CD Changer is
interconnected with the CDM-9807RB/CDM-9805R/
CDM-9803RM/CDM-9803R.

Press the SOURCE/POWER button to activate
the CD Changer.

NOTE
To start play or pause play, press the :/J button.

Make sure that the "FUNC" indicator light goes
out, then press the Preset buttons to select the
desired disc loaded in the CD Changer.

• After selecting the desired disc, you can operate in

• If the "FUNC" indicator is illuminated the Disc

The underline is lit when the function is activated.