Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Alpine
  4. nvd-z001
  5. Manual Do Utilizador

Alpine nvd-z001 Manual Do Utilizador

Download
Página de 56
48
Customizing Setups
6
7
1
2
3
When the correction has been
completed, Select “Enter” by tilting
the joystick and press ENTER.
Resetting after tyre
replacement
Resetting is required when the vehicle’s tyres are
replaced. Be sure to perform the following
resetting procedure when the vehicle’s tyres are
replaced.
Press the MENU button to display
the main menu. Select “Setup” from
the main menu by tilting the joystick
and press ENTER.
The “Setup” screen appears. Select
“Adjust” under “Calibration” by
tilting the joystick and press ENTER.
The “Calibration” screen appears.
Select “Tyre change” by tilting the
joystick and press ENTER.
The Direction calibration screen
appears. Tilt the joystick to select
“
” or “
” and press
ENTER to correct the direction.
Vehicle position/direction
correction
Others
Tilt the joystick in 8 directions to
correct the position. When the
correction has been completed,
press ENTER.
Touch:
In the case of touch operation, touch “Arrow”
in 8 directions.
1
2
3
4
5
Select “Enter” by tilting the joystick
and press ENTER.
If the actual position/direction of your vehicle and
the position/direction of the current vehicle
position icon on the map differ (for example, when
you moved on a ferry boat), you can manually
correct the position/direction of the current vehicle
position icon with the following method.
The system’s map matching feature automatically
corrects the error when you drive the vehicle
several miles in good GPS signal reception area.
Press the MENU button to display
the main menu. Select “Setup” from
the main menu by tilting the joystick
and press ENTER.
The “Setup” screen appears. Select
“Adjust” under “Calibration” by
tilting the joystick and press ENTER.
The “Calibration” screen is
displayed. Select “Pos./Direction”
by tilting the joystick and press
ENTER.