Alpine sec-150r Manual Do Utilizador

The SEC-100S/150R can be disarmed
either by the remote control transmitter or
manually using the disarm/valet switch.

Press the TX button to disarm the security
system.
(The remote control LED will illuminate to
indicate that the signal is being transmit-
ted.)

1. Enter the vehicle.  The security system

will sound the siren.

2. Turn the ignition switch to the ON

position.

3. Within 5 seconds, find the Disarm/Valet

switch and turn it to the ON position.  If
within 5 seconds the Disarm/Valet switch
is not found, the security system must be
retriggered into alarm mode again in
order to disarm the system using the
Disarm/Valet switch.