Alpine tme-m860 Manual Do Utilizador

-EN

01GB05TMEM860.fm

ALPINE TME-M860 68-04123Z81-B (EN)

Each time you touch [

] or [

], the mode is switched.

Setting item: DISPLAY MODE
Setting contents: WIDE / CINEMA / NORMAL

In WIDE mode, the monitor displays a normal picture wider to fit
in a wide-screen monitor by evenly stretching out the picture
horizontally.

In CINEMA mode, the monitor displays a normal picture by
stretching out the picture vertically. This mode is good for
displaying a cinema type picture at the 16 : 9 ratio.

In NORMAL mode, the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.

• In the Navigation mode, you can only set to WIDE.

Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.

Setting item: DIMMER
Setting contents: HIGH / LOW / AUTO

Setting item : AUX OUT
Setting contents : LINK / NAV. / AUX-1 / AUX-2 / S-VIDEO

• NAV. is displayed when NAV. is set in “Setting the Navigation Mode”

(page 7).

• AUX-1/AUX-2/S-VIDEO are not displayed when they are set to OFF

in “External Input Name Setting” (page 7).

Setting item: SOUND OUT
Setting contents: OFF / MONITOR / HEADPHONES

• The audio interruption setting for the navigation system takes

precedence over the sound output from other audio sources (radio,
CD player, etc.) regardless of setting items.

* Note that sound will not be output unless the audio output settings

are appropriate.

• When the source name of AUX 2 and S-VIDEO terminals is set to the

DVD HU, the adjustment of the audio level is made with the head
unit. In this case, sound is not output through the built-in speakers or
headphones. To output sound through the built-in speakers or
headphones, set to REAR in “Setting the Install Position” (page 6).

• The audio output level of navigation interruption is equal to the

volume level of the navigation mode.

Setting item: BEEP
Setting contents: OFF / ON

When you install this unit in the rear seat and use the optional
headphones/built-in speakers, set to REAR in this setting. If you set to
FRONT, the volume level adjustment cannot be made when you use the
optional headphones/built-in speakers.

Setting item: INSTALL POSITION
Setting contents: FRONT/REAR

DISPLAY Mode

Setting the Brightness of the Backlighting

HIGH:

Sets the brightness of the screen to the same
brightness that was set in DIMMER LEVEL HIGH in
“Adjusting the Level of Backlight” (page 7).

LOW:

Sets the brightness of the screen to the same
brightness that was set in DIMMER LEVEL LOW in
“Adjusting the Level of Backlight” (page 7).

AUTO: Adjust the brightness of the background illumination of

the monitor automatically to the brightness of the car
interior.

Rear Monitor Select Function

LINK:

Output the video/audio portion shown on the main
monitor, to the rear monitor.

NAV.:

Output the navigation video/audio to the rear
monitor.

AUX-1:

Output the AUX1 video/audio to the rear monitor.

AUX-2:

Output the AUX2 video/audio to the rear monitor.

S-VIDEO: Output the S-VIDEO video to the rear monitor.

Change Sound Output

OFF:

Sound is not output.

MONITOR:

Outputs sound through the built-in speakers.

HEADPHONES: Outputs sound to headphones if connected.

Sound (Beep) Guide Function

ON:

Activate the Sound Guide mode.

OFF: Deactivate the Sound Guide mode. The sound guide

beep will not be produced when a button on the unit is
pressed.

Setting the Install Position

FRONT: When installing this unit in the front seat

REAR:

When installing this unit in the rear seat

01GB00TMEM860.book Page 6 Wednesday, February 22, 2006 11:30 AM