Alpine TME-M740BT Manual Do Utilizador
12
-EN
01GB05TMEM860.fm
ALPINE TME-M740BT 00-00000Z00-A (EN)
Adjusting the Touch Panel (SCREEN ADJUSTMENT)
(RESET) /
(SETUP)
Adjustment becomes necessary when the display position on
the LCD and the touch position on the touch panel do not match.
the LCD and the touch position on the touch panel do not match.
1
Touch [>>] of SCREEN ALIGNMENT.
The adjustment screen appears.
2
Accurately touch the [
] mark provided in the lower
left corner of the screen.
The screen changes to the adjustment screen.
3
Accurately touch the [
] mark provided in the upper
right corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
setup mode screen.
• If you have touched a location other than the [
] mark, touch [
]
to restore the adjustment screen to the initial setting.
VISUAL EQ™ Setting
BRIGHT
MIN(-15) to MAX(+15) (Initial Setting: 0)
COLOR
MIN(-15) to MAX(+15) (Initial Setting: 0)
TINT
GMAX(G15) to RMAX(R15) (Initial Setting: 0)
CONTRAST
MIN(-15) to MAX(+15) (Initial Setting: 0)
SHARP
MIN(-15) to MAX(+15) (Initial Setting: 0)
VISUAL EQ MODE
OFF(Initial Setting) / NIGHT M / SOFT / SHARP / CONTRAST / P-1
/ P-2
/ P-2
USER MEMORY
P-1 (Initial Setting) / P-2
You can store the settings made for "
BRIGH,
COLOR,
TINT, CONTRAST
and SHARP."
After adjusting
BRIGH,
COLOR,
TINT,
CONTRAST and
SHARP, select the preset number (P-
1) or (P-2) and store it by touching [WRITE].
• You can recall the VISUAL EQ mode stored here from P-1 or P-2 of
"
VISUAL EQ Mode" (page 12).
CINEMA:
The monitor displays a normal picture by stretching out
the picture vertically. This mode is good for displaying a
cinema type picture at the 16 : 9 ratio.
the picture vertically. This mode is good for displaying a
cinema type picture at the 16 : 9 ratio.
NORMAL: The monitor displays a normal picture at the centre of the
screen with a vertical black band at each side.
CINEMA
NORMAL
OFF :
Initial Setting
NIGHT M.: Suitable for movies in which dark scenes frequently
appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not clearly
shown.
shown.
CONTRAST: Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on preset
No.P-1 from "
No.P-1 from "
USER MEMORY" (page XX).
P-2:
Recalls the VISUAL EQ mode being saved on preset
No.P-2 from "
No.P-2 from "
USER MEMORY" (page XX).
01GB00TMEM860.book Page 12 Monday, October 16, 2006 1:50 PM