ASUS m1 Manual Do Utilizador

Página de 98
39
4. Using the Notebook PC
Inserting and Removing a Drive Module
To remove a drive module:
1.
Unlock the drive module by sliding Drive Lock 2 located on the battery pack towards the front of the
Notebook PC from “Lock” to “Unlock” in the direction of the arrow as shown in the illustration.
2.
Slide Drive Lock 1 towards the rear of the Notebook PC (in the direction of the “Release” arrow
as shown in the illustration) and while holding the release latch, push the eject latch towards the
drive module in the direction of the “Eject” arrow as shown in the illustration.
3.
Relock Drive Lock 2 so that the battery pack is secured.
To insert a drive module:
1.
Unlock Drive Lock 2 before inserting a drive module.
2.
Insert the drive module with the connector first.
3.
With the drive module flush with the Notebook PC’s side, slide Drive Lock 2 the rear from “Un-
lock” to “Lock” in the direction of the arrow as shown in the illustration.
CAUTION:  The drive module must be properly secured and locked (Drive Locks 1&2)
before transporting or using the Notebook PC.
WARNING! To prevent damage to the BIOS and circuits, power OFF the Notebook
PC before removing or inserting the drive module.
Drive Module
Drive Lock 2
Drive Lock 1
Release
Eject
Unlock
Lock
Drive Eject