ASUS kn97x Manual Do Utilizador
ASUS KN97-X User’s Manual
15
III. INSTALLATION
Jumper Settings
1. Onboard Multi-I/O Selection (IOEN)
You can selectively disable each onboard Multi-I/O item (floppy, serial, paral-
lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis-
able all Multi-I/O items at once with the following jumper in order to use your
own Multi-I/O card.
lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis-
able all Multi-I/O items at once with the following jumper in order to use your
own Multi-I/O card.
Multi-I/O
IOEN
Enable
[1-2] (Default)
Disable
[2-3]
R
Multi I/O Setting (Enable / Disable)
Disabled
Enable (Default)
IOEN
1 2 3
1 2 3
IOEN
2. Flash ROM Boot Block Programming (BBLKW)
This sets the operation mode of the boot block area of the Programmable Flash
ROM to allow programming in the Enabled position. This is required only if
prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.
ROM to allow programming in the Enabled position. This is required only if
prompted by the Flash Memory Writer Utility as shown in BIOS SOFTWARE.
Programming
BBLKW
Disabled/Protect
[1-2] (Default)
Enabled
[2-3]
R
Boot Block Programming (Disable / Enable)
Enabled / Program
BBLKW
Disabled / Protected
(Default)
(Default)
BBLKW
1 2 3
1 2 3
III. INST
ALLA
TION
(Jumpers)