ASUS P4S533-E Manual Do Utilizador
26
Chapter 2: Hardware information
3. USB Device Wake-Up (3x3 pin USBV1, USBV2, USBV3)
The default setting, [1-2] (+5V) disables the USB wake-up feature. Reset
these jumpers to pins [2-3] (+5VSB) to wake up the computer using USB
devices.
these jumpers to pins [2-3] (+5VSB) to wake up the computer using USB
devices.
The USB device wake-up feature requires a power supply that can
provide at least 1A on the +5VSB lead. If this requirement is not met,
the system does not power up. The total current consumed must NOT
exceed the power supply capability (+5VSB) whether under normal
condition or in sleep mode. Also note that ONLY USB +5VSB can
support S3 resume function.
provide at least 1A on the +5VSB lead. If this requirement is not met,
the system does not power up. The total current consumed must NOT
exceed the power supply capability (+5VSB) whether under normal
condition or in sleep mode. Also note that ONLY USB +5VSB can
support S3 resume function.
P4S533-E
®
P4S533-E USB Device Wake Up
USBV1
USBV2
+5V
1 2
+5VSB
2 3
(Default)
+5VSB
2
3
+5V
1
2
(Default)
USBV3
Setting
+5V (default)
+5VSB
USBV1
[1-2]
[2-3]
USBV2/3
[1-2]
[2-3]