ASUS pi-p55t2p4s Manual Do Utilizador

III. INSTALLATION

DRAM Memory Installation Procedures:

1. The SIMM memory modules will only fit in one orientation as shown because

of a "Plastic Safety Tab" on one end of the SIMM sockets which requires the
"Notched End" of the SIMM memory modules.

1

2

3

4

5

6

Bank0

Bank1

Bank2

Notched End

72-Pin DRAM Modules

2. Press the memory module firmly into place starting from a 45 degree angle

making sure that all the contacts are aligned with the socket.

3. With your finger tips, rock the memory module into a vertical position so that it

clicks into place.

Support Clip

Safety Tab (This Side Only)

Mounting Hole

4. The plastic guides should go through the two "Mounting Holes" on the sides and

the "Metal Clips" should snap on the other side.

5. To release the memory module, squeeze both "Metal Clips" outwards and rock

the module out of the "Metal Clips".

(DRAM Memory)