ASUS S1 Manual Do Utilizador

1. Insert the PC card with the connector side

first. When the PC card is fully inserted, the
PC card bay door can close normally with-
out striking the PC card.

2. Carefully connect any cables or adapters

needed by the PC card. Usually connectors
can only be inserted in one orientation. Look
for a sticker, icon, or marking on one side of
the connector representing the top side.

1. Press in the toggle eject button and release. The

recessed spring loaded toggle button will ex-
tend when pushed in and released.

2. Press the extended button again to eject the

PC Card. Carefully pull the ejected PC card
out of the socket.

Be sure the PC card is

level when inserting.

When PC cards are inserted and running, they draw power
from the Notebook PC even when they are not in use. You
must stop the PC card service to turn the PC card OFF.

To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the
PC card icon on the Windows taskbar and stop the PC card you want to remove.