ASUS sp98-n Manual Do Utilizador

Windows NT

6. SOFTWARE REFERENCE

6.6.1 Version Note

The following descriptions apply to SiS 5597/5598 Driver Release V1.03. The de-

scriptions, however, are subject to change at anytime without notice.

6.6.2 Driver Files

(1) The enclosed SiS 5597/5598 Windows NT 3.5 & 3.51 drivers are SISTAG,
SISV.SYS, SISV256.DLL, SISV.DLL, OEMSETUP.INF.

(2) All the 16-color, 256-color, 32K/64K-color, and 16M-color drivers are available.

6.6.3 Installation

1. Double-click the Display icon under Control Panel.
2. Click Change Display Type from the Display Settings box.
3. Click Change from the Display Type box.
4. Click Other from the Select Device box.
5. Insert the SiS 5597/5598 CD disk into your CD-ROM Drive.
6. When the Install from Disk dialog box appears, type the location of the drivers

(D:\MM\WINNT\WINNT35, assumingyour CD-ROM drive is D:) and click OK.

7. Click Install and click Yes when the Installing Driver dialog box appears.
8. Click New when the Windows NT Setup dialog box appears.
9. Click Continue. A message appears stating that the drivers were successfully

installed. Click OK. You must now restart Windows NT 3.51.

6.6.4 Selecting resolution and color depth

1. Double-click the Display icon under Control Panel.
2. Click Color Palette to change to either 16 colors, 256 colors, 32768 colors,

65536 colors, or 16777216 colors.

3. To select desktop resolution size, drag the slider in the Desktop area box to

change resolution to either 640x480, 800x600, 1024x768,or 1280x1024.

4. Click Test to test the resolution.

If the display test screen is acceptable, then click Yes when the Testing Mode
dialog box appears. If the display test screen is unacceptable, then click No.
Windows NT will give you an error message.

5. If the display test screen is acceptable and you clicked Yes, Windows

NT 3.51 will prompt you to restart Windows NT 3.51.