ASUS TR-DLS Manual Do Utilizador

5. OS Driver Installation

Under this section, DOS system users have two choices.

1.     Use a utility that will copy the raw dd image onto a 1.44 Mbytes floppy

diskette. For UnixWare 2.1.X, this dd image is located at:

For UnixWare 7, this dd image is located at:

RAWRITE3.COM, which is a public domain utility, is available on this CD-
ROM at this location:

Instructions for using this utility are included in its accompanying RaWrite file
or as a Microsoft Word document located at:

2.     The other DOS alternative is to use the self-extracting image file appropriate

for your version of UnixWare. These are located under:

B. New System Installation

1.

Boot the computer using the installation diskettes or Bootable OS CD Disc
that you received with the UnixWare operating system distribution package.
For example, UnixWare 7 has two diskettes.

2.

Follow the instructions on the screen.

3.

Insert the “PCI SCSI SCO UnixWare driver” diskette when prompted to
insert the host adapter diskette. To install other host adapter drivers, insert
the host adapter diskette provided with the UnixWare distribution package
and press Enter. If there are no other host adapter drivers to install, continue
the installation and follow the instructions.

4.

The system loads the required drivers, such as C8XX, and indicates when
they are loaded.

5.

At the end of the installation, you will see a prompt to reinsert the HBA
driver diskette. Insert the “PCI SCSI SCO UnixWare driver” diskette and
press Enter. The kernel will be built and the installation will terminate.

6.

Remove the driver diskette when prompted to do so and reboot the system.

SCO UnixW

are Server