ASUS wl-320ge Manual Do Utilizador
. T
ro
ub
les
ho
otin
g
8
ASUS 802.11g Access Point
Chapter -Troubleshooting
The ASUS 802.11g AP is not
accessible.
If the ASUS 802.11g AP is not
accessible, restore it to its factory
default settings. Use a pen or paper
clip to press the Reset button at the
rear panel for over five seconds. The
power LED lights up when the AP is
successfully restored to its factory
default settings.
The following settings are the factory default settings of the ASUS 802.11g AP.
Name
Default Value
Wireless - Interface
SSID
default
Channel
6
Encryption (WEP)
None
Broadcast SSID
No
Wireless - Bridge
AP Mode
Access Point Only
Wireless - Access Control
MAC Access Mode
Disabled
IP Config - LAN
IP Address
192.168.1.1
Get IP Address Automatically Yes
Subnet Mask
255.255.255.0
Gateway
(blank)
System Setup - Password
Operation Mode
Access Point
User Name
admin
Password
admin