att 9340 Manual Do Utilizador

Your “home area code” is the area code from which you are dialing.
Numbers called within your home area code do not require you to dial a
“1” or the area code before dialing the telephone number.  “Local area
codes” are area codes that require no “1” before dialing the telephone
number; however, the area code must be dialed.

Always program your home area code, and, if you need them, your local area
codes (up to four).  Programming these area codes will change how numbers
are displayed in the call history, and will allow for correct operation of the
Display Dial feature (see below).

Make sure the  

 is not displayed.

Press 

U 

>

.

Use the softkey to select SETUP.

Select DONE until the screen displays AREA CODE 1.  Use the keypad
to enter your home area code.

Select CODE 2 to reach AREA CODE 2 (the screen displays any
current local area code stored here).  Use the keypad to enter the
three-digit local area code.

Continue as in Step 4 for area codes 3, 4 and 5 as needed
— OR —
Select  DONE to move to the next feature
— OR —
Press 

U to exit.

If you don’t have Caller ID with Call Waiting service, you can turn this feature
off (the phone comes with the feature on).

Make sure the  

 is not displayed.

Press 

U 

>

.

Use the softkey to select SETUP.

Select DONE until the screen displays CIDCW: ON.

Select CHANGE.  The screen displays CIDCW: OFF.

Select  DONE to move to the next feature
— OR —
Press 

U to exit.

AT&T 9340 book_1ATT

11/3/98, 12:40 PM

8