att 9340 Manual Do Utilizador

This telephone assigns each incoming call a number from 1 to 99.  The most
recent call will have the highest number (for example, if 10 calls have been
received, call number 10 is the most recent, and call number 1 is the oldest).
When the call history is full, the oldest call information is deleted to make
room for new incoming call information.

You can review information in the call history at any time by pressing either

<

 or 

>

, or by pressing 

U, then selecting CALL ID.  The screen displays

the number of calls in the call history and how many, if any, are new.  You
can continue to use 

<

 or 

>

 to scroll through the call history.  The screen

displays the name (if your service provides this), number, date, and time of
call simultaneously, beginning with the most recent call.

When you reach the end of the call history, the screen displays END OF
LIST

.  Press 

<

 or 

>

 to continue reviewing the call history.

To exit the review, you can press either soft key or wait 30 seconds.

As you review calls in call history, you can dial a displayed phone number by
pressing 

D

 on the handset.  The screen displays the number being

called.  If the screen displays an error indicator (for example Er), you cannot
dial any displayed digits.

If the call came from your home area code, then the screen displays only the
seven digits of the number you’re calling (without an area code).  When you
press 

D

, the phone dials the seven displayed digits.  You must

program your home area code for this to work.

You can also program up to four other local area codes. These are area codes
that do not require dialing a “1” before them.  After storing these area codes,
if you receive a call from one of these area codes, the screen displays the ten
digits (three digits of area code plus seven digits of phone number).  When
you press 

D

, the phone dials ten digits, without inserting a “1”

before the area code.  If you receive a call from an area code not programmed
in the phone, you will see ten digits on the screen (the area code and the
phone number).  The phone will automatically dial “1” before the number
when you press 

D

.

AT&T 9340 book_1ATT

11/3/98, 12:40 PM

18