Juniper CTP2000-IM-4WEM Ficha De Dados

Página de 6
2
Architecture and Key Components 
 
Figure 1:  CTP Series voice applications
Features and Benefits
Table 2:  Primary Circuit to Packet Solutions
APPLICATION
APPLICATION DESCRIPTION
BENEFIT
SS7 transport
Transport dedicated T1 or E1 SS7 links over the  
IP/MPLS network.
Eliminates point-to-point T1 and E1 links required for transporting 
SS7 traffic and allows convergence over the IP/MPLS network. No 
hardware or software changes are required on the voice switch.
PBX interconnect
Provides T1, E1, and analog 4WE&M trunking for PBX 
voice switch interconnect over the IP/MPLS network.
Eliminates point-to-point digital and analog voice switch trunks  
and allows voice trunking over the IP/MPLS network. No hardware  
or software changes are required on the voice switch.
ISDN Primary Rate 
Interface (PRI)
Transport ISDN PRI T1 or E1 between the same  
IP endpoints.  
Eliminates the need for ISDN PRI service or the point-to-point T1  
or E1 lines required for ISDN PRI, and allows the B channels and  
D channel to be transparently transported over the IP/MPLS network.
PBX extension
Provides two-wire analog PBX to phone extensions 
over IP and two-wire PBX to PBX/central office 
connections over the IP/MPLS network.  
Enables two-wire phone extensions from PBX voice switches to  
be located anywhere in the IP network, and enables the PBX to 
connect to another PBX/central office located anywhere across  
the IP/MPLS network.
2WFXS
2WFXO
CTP2024
CTP2056
T1/E1
CTPView
PBX
Service Provider
CTP2024
CTP2024
T1/E1
4WE&M
T1/E1
4WE&M
PBX
PBX
IP/MPLS
NETWORK