Axis 20443r2 Manual Do Utilizador

Example: 

For Unix/Linux, enter the following: (note that you must be the root user.)

Example (for Linux):

Note:

In some Unix/Linux systems, the arp command can be located in a directory that is not 
on the command path; e.g: /usr/sbin/arp

4. Now connect power to the camera. No more than 2 minutes should have elapsed since 

the ARP command was run. Text similar to the following is then displayed in the 
window:

5. Press Ctrl+C to stop Ping. Ensure that the Power Indicator is permanently lit and that 

the Network Indicator flashes intermittently. The IP address has been set. You can now 

access the camera and set other parameters from the setup tools. Please see page 14. 

Client computers that will be viewing the video stream from the AXIS 230 should meet the 

following recommended hardware and software requirements:

• Pentium III (1.0 GHz processor or better) or AMD Athlon. 256 MB RAM.
• AGP graphics card with 32/64 MB video memory and support for DirectDraw®. Ensure that 

the latest available driver is used.

• Sound Card (PCI based.)
• Windows® 2000 or Windows XP (with latest Service Pack.)
• Internet Explorer 5.5 or higher (with latest Service Pack.)
• DirectX® (latest version.)
• A media player (only required for viewing saved MPEG-2 files.)

c:\WINNT>arp -s 192.168.0.125 00-40-8c-18-10-00
c:\WINNT>ping ping -l 408 -t 192.168.0.125

>arp -s 192.168.0.125 00:40:8c:18:10:00 temp
>ping -s 408 192.168.0.125

c:\WINNT>arp -s 192.168.0.125 00-40-8c-18-10-00
c:\WINNT>ping -l 408 -t 192.168.0.125
Pinging 192.168.0.125 with 408 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.0.125: bytes=408 time<10ms TTL=64
Reply from 192.168.0.125: bytes=408 time<10ms TTL=64