Allen-Bradley devicenet modules in logix5000 control systems Manual Do Utilizador

Publication DNET-UM004A-EN-P - March 2004

2-8        Configure Your Network Offline

To configure the scanner to communicate with the devices on your 
network, you set up a scan list in the scanner. Then you define 
memory locations for the data of each device.

To configure the scanner offline:

Scan List

device at address 1

device at address 2

device at address 3

scan list – A list in the scanner that identifies the devices with which the 
scanner communicates. For each device in its scan list, the scanner sets aside 
input and/or output memory for the data of the device.

Output Memory

DINT

Input Memory

0

device at address 1

1

2

device at address 2

3

4

device at address 3

5

❑ Specify the Address of the Scanner

❑ Define the Properties of the Scanner

❑ Set the Alignment Option

❑ Clear or Set the Automap on Add Check Box

❑ Build the Scan List

❑ Manually Assign Each Device to a Memory Location

❑ Close the Configuration of the Scanner