Akai dvr4100vsscn Manual Do Utilizador
E - 17
(continued on next page)
Playing a Disc
This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are
produced in a manner that allows specific or limited operation during playback. As such, the
DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer
to the instruction notes of discs.
produced in a manner that allows specific or limited operation during playback. As such, the
DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer
to the instruction notes of discs.
“
” may appear on the TV screen during operation. A “
” means that the desired
operation is not permitted by the DVD Unit or the disc.
Basic playback
Playing a Disc
1.
Press the
STANDBY/ON
button on the front panel or press the
POWER
button on the remote control to turn on
the Unit while the Unit is in standby mode, press the
FUNCTION
button to select DVD mode.
See CUSTOMIZING THE FUNCTION SETTINGS (page 28-35) before proceeding to step 2.
2.
Press the
OPEN / CLOSE
button. The disc tray opens.
3.
Place the disc on the disc tray with the label side up.
4.
Press the
OPEN / CLOSE
button. The disc tray closes.
It takes a short while for your Unit to load the disc. After loading, for some discs, the Unit will automatically start
playback of the disc.
playback of the disc.
5.
Press the
PLAY
button.
Notes:
• Use the
OPEN / CLOSE
button on the front panel to open or close the disc tray. Do not push the disc tray or you
may damage the Unit.
• Let the disc tray open completely before removing the disc. Press the
OPEN/CLOSE
button to close the disc tray
after you remove the disc.
• Some Video CD are recorded with
PBC (Playback Control)
, a menu with recorded contents may appear on the
TV if you have turned the PBC on. You can make your selection according to its PBC menu. Press the
MENU
button on the remote control to turn PBC on and off anytime during you are playing back a Video CD.
Pausing playback (still mode)
Press the
II
PAUSE
button. To resume normal playback, press the
PLAY
Y
button.
Stopping playback
Press the
STOP
button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the
PLAY
button.
If you press the
STOP
button twice, the Unit’s memory will be cleared and pressing the
PLAY
Y
button will reset
the disc to the beginning.
To skip to a different track
• Press the
SKIP
button once to skip to the start of the previous track.
• Press the
SKIP
button to skip to the next track.
• For audio CD disc, use the number buttons (remote control only) to jump straight to that track number.
DVD
CD
VCD
E-17VCD.p65
9/26/2003, 5:35 PM
17