Akai mpc2000 Manual Do Utilizador
Page 22
Chapter 2: The Basics
FILTER
This enables you to change the cut off frequency
of the sound with the slider. This changes the
Freq: value of the parameter in the program.
of the sound with the slider. This changes the
Freq: value of the parameter in the program.
• Low range: and High range:
These two fields control the range of the slider effect. The Low
range: field determines the parameter value that will be pro-
duced when the pad is hit while the slider is at the bottom of its
travel; the High range: field determines the parameter value
that will be produced when the pad is hit while the slider is at the
top of its travel. The parameter value consecutively changes in any
position within the range. The available range for this field is deter-
mined by the parameter selected in the Parameter: field.
range: field determines the parameter value that will be pro-
duced when the pad is hit while the slider is at the bottom of its
travel; the High range: field determines the parameter value
that will be produced when the pad is hit while the slider is at the
top of its travel. The parameter value consecutively changes in any
position within the range. The available range for this field is deter-
mined by the parameter selected in the Parameter: field.
TUNING : -120 ~ +120
ATTACK : 0 ~ 100
DECAY
ATTACK : 0 ~ 100
DECAY
: 0 ~ 100
FILER
: -50 ~ +50
Note:
Note:
Note:
Note:
Note: The attack or decay changes within the range of 0 and
5000msec.
The AFTER key
Normally, the slider only affects notes which are actually played have
no effect on notes played back from sequences. However, if the AF-
TER key is pressed (and the associated light goes on), the slider also
effects the drum notes playing back from sequences. In this case, the
function effects the drum note of the note number (drum pad) selected
in the ASSIGN key’s screen. Further, these NOTE VARIATION
slider datum can be recorded if you are in Overdub mode.
no effect on notes played back from sequences. However, if the AF-
TER key is pressed (and the associated light goes on), the slider also
effects the drum notes playing back from sequences. In this case, the
function effects the drum note of the note number (drum pad) selected
in the ASSIGN key’s screen. Further, these NOTE VARIATION
slider datum can be recorded if you are in Overdub mode.
To return to normal operation, press the AFTER key again and the
light will go off.
light will go off.