Antares auto-tune-for tdm and vst Manual Do Utilizador

change this slider before Pitch Correction, your target pitch function may
inadvertently make corrections you did not intend, possibly resulting is
strange artifacts.

The Retune slider is only used during pitch correction. ItÕs similar in func-
tion but separate from the slider by that name in the Automatic Mode, how-
ever, the desired pitch is not the scale tone, but rather the target pitch
function. This slider allows you to specify how quickly the algorithm will
change the pitch of the input sound towards the target pitch function. A
value of zero will cause the output pitch to equal the target pitch function,
precisely. Depending on the target pitch function, this may give unnatural
sounding results. Larger values will let you use simple line segments for the
target pitch function and still let through the natural pitch gestures of the
input sound.

After you select some sound for pitch correction, press this button. It will
press in and ßash ÒwaitingÓ. Next, start playback. When the Þrst sound
occurs, this button will show ÒtrackingÓ. The pitch and envelope of the
sound is being recorded for display in the Pitch and Envelope Graphs. This
recording will stop when any of the following happen: 1) The Track Pitch
button is pressed again, 2) playback stops or is stopped (TDM only), or 3)
when the available buffer space (see below) is used up.