ART phantomiipro Manual Do Utilizador

PHANTOMIIPro 

Two Channel 48 Volt Phantom Power Supply 

ARTcessories

The PHANTOMIIPro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a 
rugged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing 
battery life. The PHANTOMIIPro installs inline between your microphone and a balanced line input on your gear. Balanced lines offer increased 
immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio 
gear, especially when long lengths of cable are used. 

The PHANTOMIIPro is an invaluable tool in application areas including (but not limited to!): home or professional recording studios, live sound, PA, 
permanent installs, DJ, AV, podcasting and broadcasting. Use it with mixers, audio processors, digital audio workstations or anywhere you need 
phantom power for your mics. 

 

XLR connectors for balanced inputs and outputs

 

Low power, high efficiency CMOS circuitry for long battery 
life using a standard 9-Volt battery (Alkaline recommended)

 

Can be powered with an external power supply for operation 
from AC mains

 

Rugged extruded aluminum case with easily accesible 
battery compartment

 

LED lighted On/Off switch

 

Low noise, low distortion circuitry

Input Connections 

Female XLR (2) 

 

Output Connections 

Male XLR (2) 

Phantom Power Voltage 

48 Volts DC typical 

Current Limiting Resistors 

6.98k Ohms (1%) 

Power Source 

9V battery 

 

 

  (IEC-6LR61, ANSI-1604A type 

 

 

  Alkaline recommended)  or 

                                                          external supply 
   

 

  7.5-12 V AC/DC, < 150 mA 

Current Drain 

10 mA - no load 

   

 

45 mA - typical (full load - 2 microphones) 

Battery Life                                        > 10 hours with Alkaline battery – typical 
   

 

  (full load) 

Dimensions 

1.85 H x 4.6 W x 3.9 D (in) 

   

 

47 H x 117 W x 99 D (mm) 

Weight 

0.82 lbs / 0.37 kg 

 

1) 

Install a battery in the unit by unscrewing the knurled fastener to open the 9V BATTERY compartment and snapping the connector on to the 
battery. Alternatively, connect an external power supply to the EXTERNAL POWER jack. The PHANTOMIIPro is protected in case both 
sources of power are applied at the same time. 

2) 

Connect the cable from your microphone to the MICROPHONE INPUT 1 or 2 female XLR connector on the front panel.  

3) 

Connect another balanced line cable between the corresponding MICROPHONE OUTPUT 1 or 2 male XLR connector on the rear panel and 
the balanced inputs of your audio gear. 

4) 

Repeat for a second microphone if desired. 

5) 

Turn on the PHANTOMIIPro by pushing in the front panel POWER button. The button will light, indicating power is applied to the unit. When 
using a battery for power, be sure to turn the unit off when not using it in order to maximize battery life. 

6) 

If connecting the PHANTOMIIPro to another piece of equipment with its own phantom power, be sure to turn off the phantom power on that 
piece of equipment.