Asrock A75 Pro4 Manual Do Utilizador

48

3.  UEFI SETUP UTILITY

3.1  Introduction

This section explains how to use the UEFI SETUP UTILITY to con  gure your sys-
tem. The SPI Memory on the motherboard stores the UEFI SETUP UTILITY. You 
may run the UEFI SETUP UTILITY when you start up the computer. Please press 
<F2> or <Del> during the Power-On-Self-Test (POST) to enter the UEFI SETUP 
UTILITY, otherwise, POST will continue with its test routines.
If you wish to enter the UEFI SETUP UTILITY after POST, restart the system by 
pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system 
chassis. You may also restart by turning the system off and then back on.

Because the UEFI software is constantly being updated, the following 
UEFI setup screens and descriptions are for reference purpose only, 
and they may not exactly match what you see on your screen.

3.1.1   UEFI Menu Bar 

The top of the screen has a menu bar with the following selections: 
Main 

To set up the system time/date information

To set up overclocking features

 

To set up the advanced UEFI features

To display current hardware status

To set up the default system device to locate and load the 
Operating System

To set up the security features

To exit the current screen or the UEFI SETUP UTILITY 

Use <      > key or <      > key to choose among the selections on the menu 
bar, and then press <Enter> to get into the sub screen.