autotech 10.425.1632gk Manual Do Utilizador

Phone 949.240.4000  Fax 949.240.0450

32240-E Paseo Adelanto, San Juan Capistrano, CA 92675

Part Number:   10.425.1632GK
Description:  

L/W FRONT SWAYBAR FOR B5 PASSAT

Notes: 
This swaybar is a direct replacement for the original one. It is a simple, bolt on installation.
 
Procedure:

1)  Place the car on jackstands so that both of the front 

wheels are off the ground.

2)  Remove the nut (1) that retains the outer link to 

the stock swaybar, and pull the link out of the bar.

3)  Unscrew the hexnuts (2) that retain the inner bush-

ing clamps to the chassis and remove the clamps.

4)  Install the new bushings onto the new swaybar, using 

a liberal amount of waterproof grease (moly grease 
for cv joints works well).

5)  Install  the  new  swaybar  in  the  original  posi-

tion  and  mount  the  inner  bushiong  clamps.  

Tighten nuts (2) to 30Nm / 22 ft lbs.

6)  Push outer link into the swaybar end and install nut. 

 Tighten nut to 90Nm / 66 ft lbs.

www.autotech.com