autotech 10.411.01.219k Manual Do Utilizador

When installing Autotech Sport Springs on 1994 and 1995 Golf or Jetta VR6 models, it is recommended to 
shorten the length of the original urethane foam bump stop on the front shock to allow greater suspension 
travel.

Using a sharp hobby knife or small saw (a coping saw works well), cut the stop at the line as indicated in 
the illustration below.

Retain the upper portion of the stop and re-install on the piston rod.
Make sure to put the dust cover back on the shock as well

Notes: The rear shock bump stop should be used in its original length.

Description: