3com WX2200 3CRWX220095A Manual Do Utilizador

C

HAPTER

 10: C

ONFIGURING

 MAP A

CCESS

 P

OINTS

(To configure a radio profile, see “Configuring a Radio Profile” on page 240.)

Uses the short-retry-count for frames shorter 
than 2346 bytes and uses the 
long-retry-count for frames that are 2346 
bytes or longer.

Allows a received frame to stay in the buffer 
for up to 2000 ms (2 seconds).

Allows a frame that is scheduled for 
transmission to stay in the buffer for up to 
2000 ms (2 seconds).

Advertises support for short 802.11b 
preambles, accepts either short or long 802.11b 
preambles, and generates unicast frames with 
the preamble length specified by the client.

Note: This parameter applies only to 
802.11b/g radios.

Classifies and marks traffic based on 802.1p 
and DSCP, and optimizes forwarding 
prioritization of MAP radios for Wi-Fi 
Multimedia (WMM).

Radio does not function as a location 
receiver in an AeroScout Visibility System.

Transmits frames longer than 2346 bytes by 
means of the 
Request-to-Send/Clear-to-Send (RTS/CTS) 
method.

No service 
profiles defined

You must configure a service profile. The 
service profile sets the SSID name and other 
parameters. 

Requires clients to send a separate PSpoll to 
retrieve each unicast packet buffered by the 
MAP radio.

Table 12   Defaults for Radio Profile Parameters (continued)