Aiwa NSX-D20 Manual Do Utilizador

Turns off the unit automatically after a specified time.

Press SHIFT+SLEEP on the remote control.
"SLP" appears on the display.

Press f or g repeatedly to set the sleep
timer duration.
With each press, the timer duration changes in 5-minute
steps between 5 to 240 minutes. If there is no button input
for 4 seconds, the current setting is entered automatically.
The unit turns off after the selected time.
• MULTI JOG is also available in place of f or g.

Tip:
The display is dimmed while the sleep timer is active.

To check the remaining time until the unit turns off
Press SHIFT+SLEEP on the remote control. The remaining
time is displayed for 4 seconds.

To cancel the sleep timer
Press SHIFT+SLEEP twice on the remote control so that "SLP
OFF

" is displayed.

Turns on the unit at a specified time for the specified duration.
Make sure the clock is set correctly.

Press TIMER (SHIFT+TIMER on the remote
control).
"5" indicator lights up and "  PLAY" appears on the
display. Then, the timer-on time and the source name
appear alternately on the display.

Press f or g to set the timer-on time, then
press aSET or ENTER.
If f or g is not pressed within 6 seconds, you
will exit the timer setting mode and the previous setting,
however, is entered.

Press  f  or  g  to select the source, then
press aSET or ENTER.

Press  f  or  g  to set the timer-activated
duration, then press aSET or ENTER.
With each press, the timer-activated duration changes in
5-minute steps between 5 to 240 minutes.

Press  f or g to adjust the volume level
for timed playback, then press aSET or ENTER.
Adjustable range: 0 to 16

Prepare the source.
To play CD(s), load disc(s).
To play the radio, select the band and tune in to the desired
station.
To play a tape, insert the tape and select the deck.
To play external equipment connected to the VIDEO/AUX
jacks, set an external timer for the equipment so that its
playback begins at the same time.

Press POWER 6STANDBY/ON to turn the unit
off.
At timer-on time, the unit turns on and plays the selected
source. After the specified timer-activated duration, the
unit turns off again.

Tip:
The display is dimmed while the timer playback is active.

• To stop timer setting in steps 2 to 5, press s.

Timer standby mode is also canceled.

• Timer playback will not begin unless the unit is turned off

first.

• Connected equipment cannot be turned on or off by the built-

in timer of this unit. Use an external timer.

• MULTI JOG is also available in place of f or g.
• In step 3, TAPE, TUNER, VIDEO/AUX, CD or FUNCTION is

also available to select the source.
In step 5, VOLUME +,- or VOLUME is also available to
adjust the volume level.