AirLive ov-110tsc Guia De Configuração Rápida
5
OV-110TMC/OV-110TMT/OV-110TSC
English
Link Lost Forwarding (DIP-Switch 3): When LLF is enable, it allows UTP link failures to be reported to the
fiber side and also allows Fiber link failure to be reported to the UTP side. Therefore, a link loss forward
feature is provided in both UTP and Fiber side.
Pure Converter mode (DIP-Switch 4): When pure converter mode is enabling (on), it operates with the
minimum latency. The transmission flow does not wait until entire frame is ready, but instead it forwards the
received data immediately after the data being received. And TP port should be forced at 100M in this
application. When DIP-Switch is in Switch Converter mode (off), the converter function is same as Switch
Hub.
English
DIP-Switch
S/W No
Status
Description
1
ON
OFF
OFF
UTP 100Mbps Full Duplex mode
UTP Auto-Negotiation
UTP Auto-Negotiation
2
ON
OFF
OFF
Fiber in Half Duplex
Fiber in Full Duplex
Fiber in Full Duplex
3
ON
OFF
OFF
LLF Enable
LLF Disable
LLF Disable
4
ON
OFF
OFF
Pure converter mode
Switch Converter mode
Switch Converter mode