Alinco dj-175 Manual Do Utilizador

4.Basic Operation

The following parameters can be stored in each of the memory channels.

• Frequency

• Offset frequency *

• Skip channel setting

• Shift direction (+/-) *

• Busy channel lockout (BCLO)

• Tone encoder frequency *

• Transmission power (H/M/L)

• Tone decoder frequency *

• Battery save setting

• Tone encoder/decoder setting (TSQ) *

• Clock Shift setting

• DCS code *

• Alphanumeric channel tag

• DCS setting *

This mode is used to recall a most frequently used memory channel (stored in MC

channel) with a single key-touch.

1. Press the 

key.

" "  is displayed on the LCD, and the channel

programmed in MC is recalled.

2. Press the 

key again or the 

key in the

Call mode to return to original operating mode

(VFO/memory).

• The dial and direct key-entry of frequency/memory channel are blocked in the

Call mode.

• It is possible to temporary change the offset and CTCSS/DCS related

parameters in the Call mode.

• The Scan function is deactivated in the Call mode.
• The CALL channel reprogramming is possible but it can't be deleted from the

memory channel mode.

4.6

Only parameters marked "*" are programmable in Repeater-Access function memory.