australian-monitor amis120p Manual Do Utilizador
‘On’ LED
The blue “On” LED above the power switch will illuminate when the amplifier is connected to mains
power and is switched on, or when the amplifier is connected to DC power.
power and is switched on, or when the amplifier is connected to DC power.
Signal LED
The green “Signal” LED located next to the ‘On’ LED indicates that the AMIS120P is receiving audio
signal via its line level input. The signal LED is a simple way to trouble-shoot installations especially in
multi amplifier projects. At a glance the signal LED will indicate that audio is reaching the amplifier.
signal via its line level input. The signal LED is a simple way to trouble-shoot installations especially in
multi amplifier projects. At a glance the signal LED will indicate that audio is reaching the amplifier.
Rack Mounting
The AMIS120P is supplied with rack ears attached to allow mounting within a standard 19” equipment
rack. As is the case with almost all audio products, adequate ventilation and air flow is required. When
installing multiple AMIS120P power amplifiers within the one rack, it is recommended that at least one
rack unit of ventilation space is left between every two amplifiers. For table or shelf mounting, the rack
ears can be removed using a screwdriver. Once the rack ears are removed, please reinstall the screws.
rack. As is the case with almost all audio products, adequate ventilation and air flow is required. When
installing multiple AMIS120P power amplifiers within the one rack, it is recommended that at least one
rack unit of ventilation space is left between every two amplifiers. For table or shelf mounting, the rack
ears can be removed using a screwdriver. Once the rack ears are removed, please reinstall the screws.
Rear Panel Features
AC Power Inlet
The 3 pin IEC power inlet is located at the bottom left of the rear panel and accepts a standard mains power
lead fitted with an IEC connector.
lead fitted with an IEC connector.