Alinco dj-v17r Manual Do Utilizador

8.Set Mode

This function prevents useless battery consumption by switching the power ON/OFF

at a fixed ratio if there is no key operation or receiving signal for a continuous period

of 5 seconds or more.

1. BS-ON is displayed on the LCD.

2. Rotate the dial to select the battery save setting (on or off).

• The factory setting is BS-ON

• The Battery Save function is temporarily suspended when a key is operated or a

signal is received.

• Set this parameter OFF for packet operation.

• The display remain unchanged even the BS function is in the OFF cycle.

Select the scan-resume condition in this menu (page 31).

1. TIMER is displayed on the LCD.

2. Rotate the dial to select the scan-resume condition between TIMER and BUSY.

Select OFF to turn off all the beep sounds inclusive of alerting beeps.

1. BEP-ON is displayed on the LCD.

2. Rotate the dial to select the beep setting on and off.

1. 1750 is displayed on the LCD.

2. Rotate the dial to select the tone-burst frequency.

1750

2100

1000

1450

(unit: Hz)

BEP-ON

BEP-OF

TIMER

BUSY

BS-ON

BS-OFF

8.3