avolites pearl exper ttitan Manual Do Utilizador
Copyright Avolites Limited 2010
Page 32 – 2. Patching
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
1> Press Patch (bottom right of console).
2> Press
2> Press
[Fixtures].
3> Select correct fixture
manufacturer from the
softkeys (F and G page
through the list of
manufacturers). Or use
Quick Search and type the
first few letters of the
manufacturer’s name on
the keyboard to find the
one you want.
4> Select correct fixture from
the softkeys (F and G
show other pages). You
can use Quick Search here
as well.
5> Select the correct fixture
operating mode from the
softkeys.
6> Softkey B shows the first
free DMX address. Type
the new address on the numeric keypad if you want a different
one. Press [DMX line=xx] to patch to a different DMX line, or
you can enter the address as [line].[address], e.g. 2.45 would
set address 45 on line 2.
7> Press a Preset Select
button or fixture touch
button to patch the
selected fixture.
8> The Select button will light
up dimly to show that it is
patched. Fixture Touch
buttons turn dark blue and
show fixture details.
9> Repeat from 7 to patch
more of the same fixture
type. The DMX address
automatically updates so
you can just keep patching
by pressing Select
buttons.
•
You can patch a range of
fixtures by holding down
the first and last Select
buttons of the range, in
the same way as for dimmers.
•
You cannot patch more than one fixture onto a preset. If the
preset is already used, the patch will fail.
•
If you are patching a fixture which uses a separate dimmer
channel, such as a VL5, you can patch the dimmer channel onto
the same handle as the moving light part of the fixture so you